Questions on the Enthoo Luxe BLACK

[savagesam117]

Ah okay, you could also change the fittings, they can bring down the cost.

You could swap for the OcUK fans, that would save you £20.

I don't know what block you need for your card, you could go for a thermosphere type cooler with vram heat sinks to keep them cool.

You don't need the hose cutter, you can use scissors but it doesn't make a very clean cut.

You won't need 5 litres of coolant

Yeah 8 would work but you may need things like 90 degree bends etc.

That res thing looks horrid in my opinion!

 

[Bickaxe]

2 fittings for each component. If you are determined to put a 360mm Rad in the top, then a couple of 45° angle fittings may help as well.
The OCUK Silverstone fans are great value (and black so work with everything)
Fresh blade on a Stanley knife cuts the tube easily.
Link your forum account for free delivery

 

[theaterix]

Ah okay, you could also change the fittings, they can bring down the cost.

You could swap for the OcUK fans, that would save you £20.

I don't know what block you need for your card, you could go for a thermosphere type cooler with vram heat sinks to keep them cool.

You don't need the hose cutter, you can use scissors but it doesn't make a very clean cut.

You won't need 5 litres of coolant

Yeah 8 would work but you may need things like 90 degree bends etc.

That res thing looks horrid in my opinion!

I figured I would need 5 litres haha!
The res was just for the convenience to be honest, it may not look the best, but I have heard people having stresses over the res/pump mounting in the Enthoo

 

[theaterix]

2 fittings for each component. If you are determined to put a 360mm Rad in the top, then a couple of 45° angle fittings may help as well.
The OCUK Silverstone fans are great value (and black so work with everything)
Fresh blade on a Stanley knife cuts the tube easily.
Link your forum account for free delivery

Would 2x240 or 1x360 be better in terms of price for performance??
Think ill grab the OCUK fans, as they are cheaper, look nice, and come in 3 packs
I was thinking of grabbing some 45 degree fittings... Which ones are good? Also how many would i need?

 

[Bickaxe]

Would 2x240 or 1x360 be better in terms of price for performance??
Think ill grab the OCUK fans, as they are cheaper, look nice, and come in 3 packs
I was thinking of grabbing some 45 degree fittings... Which ones are good? Also how many would i need?

I have 2 x 240mm (top and front as I don't need HDD bays).
Temperatures equalise anyway but if you are adding your GPU to the loop, I would go for 2 x 240mm.

I can't fault the Monsoon fittings I have, it depends how many you want really. You still need fittings on them (not sure on other makes like EK or XSPC as they may be an all in one fitting)