80mm Case Cooling with no mounts

Associate
Joined
26 Aug 2009
Posts
743
Overclocking the GPU was great until I put the glass panel back on :)

There are no mounts in the case for fans, except the top of the case where I have a 240M AIO cpu liquid cooler.

A blower GPU would probably be ideal, but that's not what I have. The front of the case has venting, I thought maybe I could pop two 80mm fans in there - blu tack them in or something...

Short of doing a custom WC loop, what do you think?

New PC Build by dancook1982, on Flickr
 
I didn't know they did AIO coolers like that, they don't make it clear - but I assume you can cool the GPU with it too.

The external dimensions of the case is just barely 380mm long, it supports a 240mm rad only.

Oh for custom loop I believe the PSU be mounted lower leaving some space to mount a small reservoir, custom drilling though.
 
You'll still ideally need 360 rad to cool both Cpu and gpu.. You havnt got space for one 240 and one 120?
 
You'll still ideally need 360 rad to cool both Cpu and gpu.. You havnt got space for one 240 and one 120?

Are you discounting air cooling completely?

I have space (no mounts) at the end of the graphics card for 2 x 80mm case fans - not sure if they should extract or provide intake though.
 
Last edited:
80mm fans will just make a lot of noise.. But hey its better than nothing.. I know you said you're tight on space but might be worth looking into getting something slightly bigger casewise?? Longterm

You're getting 1070/80 anyways which runs cooler so might be okay?
 
80mm fans will just make a lot of noise.. But hey its better than nothing.. I know you said you're tight on space but might be worth looking into getting something slightly bigger casewise?? Longterm

You're getting 1070/80 anyways which runs cooler so might be okay?

Well I'm only looking to making the most of the case I have :) don't want to change it - I will just work around it.
 
Back
Top Bottom