What fittings for 16/12 PETG?

16mm is what you want as the 12mm in the internal diameter.

EK, barrow, bitspower. Barrow being quite highly recommended as quite cheap and also on par quality with bitspower which are quite a bit more expensive. Only downside to barrow is they are quite hard to get hold of.

EK are reasonably good quality, cheap, good cover and warranty and easy availability from OCUK.
 
With hard tubing only the outside diameter matters, because nothing touches the inside of the tubing (unlike soft tube fittings where the tubing is pushed over a barb/nozzle).

So, just search for 16mm as I've found internet searches get mixed up if I include other dimensions.
 
Be sure to check which brand tube you are buying also because 16mm is not the exact same measurement as those in “ despite some labelling it as such... best to match the brands to be sure of a tight fit
 
Smffy said:
Be sure to check which brand tube you are buying also because 16mm is not the exact same measurement as those in “ despite some labelling it as such... best to match the brands to be sure of a tight fit
Click to expand...
I have ordered
Bitspower 16/12 PETG tubing
with EK HDC 16 fittings.

Hopefully these are okay together
 
AlphaMale1 said:
I have ordered
Bitspower 16/12 PETG tubing
with EK HDC 16 fittings.

Hopefully these are okay together
Click to expand...

Yep, it’s the American brands like Monsoon you have to watch out for. Bitspower is sold in metric so you’re all good, although it’s possible for some variation.
 
You must log in or register to reply here.
Back
Top Bottom