Best 5G LTE Router

jamie-warez · 31 May 2022 at 23:17

This is what i do, but it still boots with no network or wifi and after about 2 minutes the power light goes out with just the Ethernet flashing..

jamie-warez · 31 May 2022 at 23:24

This is what i do i hold the reset button when powering on until the power light flashes then let it go it just boots the same with no network

WJA96 · 1 Jun 2022 at 07:16

Do you have another router? Plug it into another router and, if it’s stuck in CAP mode it will take an IP address from the other router and you can factory reset it.

If it’s stuck in NETInstall mode then you’ll need to download the NETInstall tool from Mikrotik’s website and reset it from that.

jamie-warez · 1 Jun 2022 at 16:07

Hi got it working now thanks, needed the routerOS reslashed...
What is the best Mode to use i am using LTE AP Dual at moment and for some reason the router stops assigning IP addresses after some time and i have to use static IP to get connection. back....i have other routers connected via Ethernet, could this be the problem Mabe i need to use bridge mode sorry i am totally new to Mikrotec routers and its a little over my head..

WJA96 · 1 Jun 2022 at 16:17

jamie-warez said:
Hi got it working now thanks, needed the routerOS reslashed...
What is the best Mode to use i am using LTE AP Dual at moment and for some reason the router stops assigning IP addresses after some time and i have to use static IP to get connection. back....i have other routers connected via Ethernet, could this be the problem Mabe i need to use bridge mode sorry i am totally new to Mikrotec routers and its a little over my head..

I’m glad you got it running. I’m guessing you had to use the NETInstall tool?

Can you post up a diagram of what you have please because this is starting to sound quite complicated.

jamie-warez · 3 Jun 2022 at 15:59

WJA96 said:
I’m glad you got it running. I’m guessing you had to use the NETInstall tool?

Can you post up a diagram of what you have please because this is starting to sound quite complicated.

Thanks for the help, i had a fault on my billion router I was using as an Ethernet switch for my CCTV/IP-PBX when i connect the billion to my network everything goes down i have ordered a new simple switch and should be delivered tonight this should solve the problem....