Advice on my build.

Associate
Joined
13 Feb 2009
Posts
1,954
Location
London
I'm looking to add some parts to my build for Gaming.
i'm a trader also. so i use it for that as well as gaming.
I've written above each parts.
Any advice would be appriciated
Thanks :)

I have this coming tomorrow. i'll be overclocking.

I'm Thinking of getting this board because i want the Optical connetion.

Will there be much difference in gaming fps with between these ram sticks?


I've had this NVME for a while for my main windows 11 pro. so i may be using this again in the new build. unless you recommend i change it? i'm looking for a 2TB NVMe SSD for gaming. should i get the same Corsair Force MP600 PRO XT. or somethig else?

I'll be ordering this card.

I already own one of these monitors

I already own this case. should i change the front fans? or keep them as they are?

Cpu cooler i'll be ordering a DeepCool LT720 AIO

As for case fans. i'm looking at 3X120MM on the AIO. 2X 120mm at the bottom of the case. and 1x120 or 140 on the rear of the case?

I have this Power Supply

Thanks Again.
 
I'm Thinking of getting this board because i want the Optical connetion.

B650 Tomahawk has a spdif if you're happy to lose pcie 5.0.

Will there be much difference in gaming fps with between these ram sticks?


Nope (video on memory scaling with X3D).

I've had this NVME for a while for my main windows 11 pro. so i may be using this again in the new build. unless you recommend i change it?

Nope.
 
B650 Tomahawk has a spdif if you're happy to lose pcie 5.0.



Nope (video on memory scaling with X3D).



Nope.
Thanks for the reply.
As i'm looking to add a 2GB NVME for games. Do you think i should just get another Corsair Force MP600 PRO XT 2TB?

I want to get the TeamGroup Delta ram due to tighter timmings. but i noticed is isn't EXPO. but the Kingston FURY Beast is.
would that be a problem?

Cheers.
 
As i'm looking to add a 2GB NVME for games. Do you think i should just get another Corsair Force MP600 PRO XT 2TB?

Sure, you could.

Personally if you wanted high-end then I'd buy a different drive (like Firecuda 530 or P5P, just so that if there are unknown issues down the line (with compatibility, the flash, the controller, or whatever), you won't end up with two duds, or two drives that need replacing at the same time.

i noticed is isn't EXPO. but the Kingston FURY Beast is.
would that be a problem?

From what I've seen, XMP RAM is still working fine with AM5, but obviously there's no guarantee.
 
Sure, you could.

Personally if you wanted high-end then I'd buy a different drive (like Firecuda 530 or P5P, just so that if there are unknown issues down the line (with compatibility, the flash, the controller, or whatever), you won't end up with two duds, or two drives that need replacing at the same time.



From what I've seen, XMP RAM is still working fine with AM5, but obviously there's no guarantee.
Sounds like a better choice to get a different drive then.
would you get the Kingston FURY Beast ram to be on the safe side?.

Thanks for your advice.
 
Have you checked the QVL? There are XMP & EXPO kits on there. KF560C36BBEK2-32 I can find, FF3D532G6000HC30DC01 I can't.
It only shows support for the Kingston FURY Beast EXPO. so i'll stick with that i guess :)

This a good set of ram?
 
Last edited:
Back
Top Bottom