Hi,
I am having a problem installing XP with my SATA drive, this problem is really making me bang my head against a wall. Not a noob to this sort of thing, but this is my first P4 mobo.
I just cant seem to get past trying to install the drivers, here is exactly whats going on.
Turn on computer
Press any key to Boot from CD...
Press F6 to install any third part SCSI or RAID drivers (i press F6)
Setup is loading files........ (loads for about 1 minute)
Press S to specify additional Device
Insert floppy > Press enter
screen loads with 2 options
-NVIDIA RAID Class Driver
-NVIDIA NForce Storage Controller
I press enter choose the first option NVIDIA RAID Class Driver
it starts loading nvraid.sys (takes about 5 seconds)
then the screen goes to:
Setup will load support for the following mass storage devices
- NVIDIA RAID Class Driver
To specify additional press S, so i do so and select the NVIDIA NForce Storage Controller
it loads nvatabus.sys (takes about 5 seconds)
then it goes back to the screen saying
setup will load support for the following devices
- NVIDIA RAID Class Driver
- NVIDIA Storage Controller
Press enter to continue
Setup is loading files...... (Takes about 1 minute)
Setup is starting windows
Screen gives me the usual 3 options of installing windows, recovery or exit.
i choose install window xp.
loads saying
setup did not find any hard disk drives installed on your computer. Make sure any hard disk drives are powered on and properly connected to your computer and that any disk related hardware configuration is correct. this may involve running a maufacture-supplied diagnostic or setup program
setup cannot continue press F3 to quit.
I also tried the raid class driver and the storage controller separately. Also, my bios has the sata ports turned on and nvidia raid turned on.
Finally I decided to try the Silicon Image port instead, so connected my drive to the sil image port, and enabled sata2 for that port in the bios, and repeated the steps above except with the sil driver. Same result. Can't get Xp installed with the sil ports either.
If I installed XP and the nvidia chipset drivers onto an ide disk, and then ghosted that onto my sata drive - would it work ? Last thing I can think of.
I am having a problem installing XP with my SATA drive, this problem is really making me bang my head against a wall. Not a noob to this sort of thing, but this is my first P4 mobo.
I just cant seem to get past trying to install the drivers, here is exactly whats going on.
Turn on computer
Press any key to Boot from CD...
Press F6 to install any third part SCSI or RAID drivers (i press F6)
Setup is loading files........ (loads for about 1 minute)
Press S to specify additional Device
Insert floppy > Press enter
screen loads with 2 options
-NVIDIA RAID Class Driver
-NVIDIA NForce Storage Controller
I press enter choose the first option NVIDIA RAID Class Driver
it starts loading nvraid.sys (takes about 5 seconds)
then the screen goes to:
Setup will load support for the following mass storage devices
- NVIDIA RAID Class Driver
To specify additional press S, so i do so and select the NVIDIA NForce Storage Controller
it loads nvatabus.sys (takes about 5 seconds)
then it goes back to the screen saying
setup will load support for the following devices
- NVIDIA RAID Class Driver
- NVIDIA Storage Controller
Press enter to continue
Setup is loading files...... (Takes about 1 minute)
Setup is starting windows
Screen gives me the usual 3 options of installing windows, recovery or exit.
i choose install window xp.
loads saying
setup did not find any hard disk drives installed on your computer. Make sure any hard disk drives are powered on and properly connected to your computer and that any disk related hardware configuration is correct. this may involve running a maufacture-supplied diagnostic or setup program
setup cannot continue press F3 to quit.
I also tried the raid class driver and the storage controller separately. Also, my bios has the sata ports turned on and nvidia raid turned on.
Finally I decided to try the Silicon Image port instead, so connected my drive to the sil image port, and enabled sata2 for that port in the bios, and repeated the steps above except with the sil driver. Same result. Can't get Xp installed with the sil ports either.
If I installed XP and the nvidia chipset drivers onto an ide disk, and then ghosted that onto my sata drive - would it work ? Last thing I can think of.
Last edited: