Search results

OK, that fixed it, had to move them to the A2 and B2 slots, now working at 6000mhz, thanks

I just built a new system with these components Asus TUF Gaming Z790-Plus WiFi i5-13600KF 2x 16gb Corsair Vengeance 6000mhz DDR5 Using the latest BIOS 1205, when enabling the XMP profile the system does not POST, I get no display, the Q-LED gets stuck on DRAM check, then briefly goes back to...

I'm building a system with the Asus WS C621E SAGE which has an EEB form factor so I'm looking for suitable cases but not with tempered glass I've seen the Phanteks Enthoo Primo which looks ideal but are there any others This will also have the following parts Dual Intel Xeon Gold 6148 Dual...

No the single DIMM does not work in any slot, also if try and use the 4 DIMMS in a different slot configuration I get warning saying that these slots are not optimised or something like that

I've tried each stick on the far right slot and 1 stick causes a no video signal, however when I use a the other 3 sticks and the suspect stick in another slot it does boot but as mentioned the motherboard is giving conflicting results https://imgur.com/x3keaaJ

Corsair Vengeance LPX 4x 16gb 2666mhz, installed in the recommended slots but only 49gb is recognised, Windows reports the same that only 3 slots are in use, I've tried enabling A-XMP/reseating the memory in serial number order I've used the same memory in my other Zenith Extreme board with no...

Its converted into an RJ45 socket (the cable just happened to have db12 printed on it) into the Gefen extender I need to convert from BNC to HDMI though

I used to have an old Christie LWU505 Projector which has specifically these connections which is faulty BNC x 5 (R,G,B,H,V & Y, Pb/Cb, Pr/Cr & Composite) My current set up with the LWU505 has primary VGA and HDMI connections, the 5x BNC connections are for a secondary VGA RGB connection in...

I'm looking for a 5.25" front panel which specifically has USB 3.0 ports (anything else is just a bonus), it needs to be plugged into a USB 3.1 gen 2 header on the motherboard Any suggestions?

The XMP option only has Profile 1 and disable, so I left it on disable and tried setting the frequency manually in stages 3400mhz seems to be stable 3467mhz booted but I got BSOD after POST 3600mhz I got the BD error code

I have the following parts Asus WS X299 Sage /10g (0402 bios) i9 7900X Corsair Vengeance 64gb DDR4 3600mhz (4x 16gb) Corsair AX860 The memory is populated in A1/B1/C1/D1, every time I enable XMP profile in the BIOS and reset I get a bd error code and no signal from the monitor which would...

Nope its purely for capturing images from a microscope at high speed, the datasets created can be as large as 900gb but as soon as they are created they are uploaded to the storinator This was put together literally a couple days before they announced the 905p 1.5TB so I may change it to two of...

The data is being uploaded to a Storinator XL45 which I believe is full up with 10TB Ironwolf drives, we have a 40Gb backplane so network transfer speeds will not be an issue The cameras throw data up to 850mbps but not continuously

I've configured the following system which will be used to gather data and transfer to a NAS using a 10Gbe line, the main requirement is that it will handle two cameras flinging data at 850mb/s each (connected by a single PCIe frame grabber (uses an x1 PCIe interface). I want to make sure there...

Can anyone tell me if this daughtercard for the ROG Zenith Extreme supports 2TB m.2 drives in RAID 0 as a data disk only?

That Gigabyte card looks just the job thanks

I'm building a system with 2-4 1TB NVMe m.2 drives to be run in RAID 0, I'm looking for a PCIe adapter which can host all the drives, I did see the Asus Hyper m.2 PCIe adapter which has four m.2 slots but this seems to only work with the Intel 600p series which seems to be end of life I'm...

I'm currently rocking this system MSI Z97m Gaming i5-4670k at 4ghz Noctua NH-U12s Samsung 960 Evo M.2 250gb Samsung 950 Pro 512gb - Steam games Samsung 950 Pro 128gb - Origin games Superflower Leadex Gold 650w 2x 4gb Corsair Vengeance 1600mhz MSI GTX 1060 Gaming X Plus As I found out last year...

OK so I'm guessing the code cannot be 'untied' from my PSN account?

I recently picked up the PSVR bundle with VR Worlds which was supplied as a download code, is this a one time use so for instance if I were to format the PS4 and sell, would the download code work again or not?