Thanks for the replies.
I was hoping that it would fit length-wise without having to change the internal layout. The card is listed as 319mm long which is about the length that is available before the drive cage area. I don't have anything in the lower drive cage area so I'm hoping that if the...
Hi,
I have preordered this GPU and just wondered if anyone had fitted on into a Fracctal Define R6 without any issues?
My main concern is that the R6 takes a max width GPU of 155mm including power connectors - the card itself is 140mm wide, so I'm wondering if it might be a bit of a tight fit...
Not really going to help you but I have what sounds like the same problem on my old 2008 MacPro.
F what you’ve described it sounds identical - I push the power button on the front and nothing happens for a good few seconds then a click and it boots up. Does the same thing every time. But always...
Hi,
Hoping to build my sons new pc at the weekend.
We have all the parts except gpu so I’m going to be donating my 1080ti until we can get him a RTX 30anything card.
What will I need to do to switch my pc back to integrated graphics? Is there a best practice for doing this?
Thank you very...
Hi,
Thank you for the reply.
Do you know if the corsair RAM I listed above will work with the MSI motherboards? I have tried to find a MSI RAM QVL list but haven't been very successful.
Thanks again,
Moley
Hi everyone,
My 16 year-old is looking to build his first “proper” gaming PC. I have some parts that I will be donating to the cause.
I’m hoping some people may be able to offer opinions on the parts we don’t already have. We have a budget of around £800ish for the remaining parts. I’m not...
Hi,
I need to get some new toner cartridges for a Dell C1660W colour laser printer.
Can anyone recommend a reliable make of compatible toner cartridges that won't break the bank?
Thank you very much.
Moley
Hi,
I hope that everyone is keeping safe and well.
Question as per title really.
I have 2 x NVMe drives installed (M.2 Sockets A and P) and 4 SATA SSDs hooked up (to motherboard SATA ports 0, 1, 2 and 3)
Now, I would like to install a third NVMe SSD in to the M socket which disables...
Hi everybody,
I hope that everyone is keeping well.
I have decided to try and add a bit of RGB goodness to my build and found an addressable RGB kit with a couple of 3-pin 5V strips (admittedly not from OC, I'm afraid).
I have looked in the mobo manual and from what I can tell I have to use...
Hi everybody
If I were to update my BIOS to 10b on my Z390 Aorus Master with 9900K will I get any performance losses especially concerning the security mitigations?
Any information would be greatly appreciated.
Many thanks
Moley
Hi everyone,
In my PC, I have a boot drive, an internal data drive and finally an internal backup drive (I also have various external backup drives that are kept in alternative locations).
Currently, my internal backup drive has its power cable disconnected when not in use to protect it in...
Hi everyone
Thank you for the replies.
I have installed the RAM and so far so good - now running a memtest to check all is well.
@HungryHippos - if it was the hotukdeals one then yes, I did
Has anyone over locked this RAM yet for better speeds and/or timings?
Thanks again everyone
Moley
Hi everyone,
I am looking for confirmation if the following RAM will be 100% compatible with the z390 Aorus Master Mobo with 9900K.
I have checked the Memory Support List but cannot find the exact code on there but I can find a similar code, hence my question.
This is the RAM I would like to...
I’ve got the SSD driver thanks - Samsung NVM Express Driver 3.0. Did you use it for NVMe or SATA drives when it fixed your issue? I’ve left my 2 NVME 970s in and and 2 850 Evo SATA
Windows is now installing. I will let you now how things progress.
Thank you all SOOO much for taking the time to...
Hi Plec
I wont be sending it back to them to do the bios update. I went ahead and did it myself with the Intact version selected (this appeared to be the default setting) and the flash appears to have been successful so far. Now to reinstall Windows. Again.
Thank you everyone.
Do you happen to have link to the Samsung driver please? If it is a SATA driver would it still work with my NVMe drives?
What about For my non Samsung adds? Would they still work OK?
I am currently chatting with support from where I got my machine and they are saying that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.