ddr5

GSkill RMA no longer to the Netherlands for residents in the UK, now Taiwan due to the impact of Brexit on UK package shipments to and from the EU, according to this post on reddit. Source: https://www.reddit.com/r/GSkill/comments/1cftcnj/lifetime_warranty_is_worthless_in_uk/

Hi, I have 3 16gb sticks of this ram CP16G56C46U5. I have b760 tuf ddr5 motherboard.my cpu is 12600k. I cant make the rams working at advertised speed of 5600mhz. It doesnt even boot to bios if I manually set the speed in bios. Even not after enabling xmp. If I clear cmos it then boots at...

Why are 24 GB and 48 GB DIMMs C46 whereas 16GB and 32 GB DIMMs are as low as C30? What impact does this have on performance?

Hi all Buildzoid has an updated memory buying guide for December. https://youtu.be/2-LqWdvoFLY?si=M2v3La7DjfQ-kFR5 One major takeaway from this video: don’t run a 4 DDR5 RAM config - daisy chain motherboards don’t work well with 4 RAM slots populated.

Hi, I recently purchased a new desktop(https://www.lenovo.com/us/en/p/desktops/legion-desktops/legion-t-series-towers/legion-tower-7i-gen-8-(34l-intel)/90v7003jus?orgRef=https%253A%252F%252Fwww.google.com%252F) and trying to figure out memory speeds. ran aida64 and the first results were around...

Hi, I'm just looking at DDR5 for the 7900X, is there a particular timing or speed I should aim for? I've noticed some say 6000 but not sure what cas to go with. Thank you

So I’ve enable Xmp recently on my ram as it can go up to 6000Mhz with the default xmp profile and have noticed instabilities like games crashing etc I was wondering if anyone had any advice or knows how to manually do the overclock? As I’ve heard Xmp and ddr5 is not very good and my motherboard...

Hi all, I'm pulling together the final components to a new AM5 build. I have the MSI Tomahawk motherboard (https://www.msi.com/Motherboard/MAG-B650-TOMAHAWK-WIFI) and a 7700x CPU. I'll be primarily playing MW2 and maybe some 3D structural analysis for work. I have also recently purchased the...

Would i be right in saying or thinking that there wouldn't/won't be issues with 64GB (2x32gb) 5200MHz DDR5 kit (XMP enabled) as regards to posting or speeds etc with Asus ROG Z690 Maximus Hero board? I don't like the idea of the 32GB (2x16gb) kit cause i'm going to be using my system for a lot...

Anyone managed much success with overclocking DDR5 yet? I've managed to settle my cpu overclock over the past 2 days at a point where im happy with both temperature, voltage and speed and now looking at upping the speed on my memory kit. The kit has the sku CMK32GX5M2B5600C36 5600mhz 32gb...

Hello everyone! First of all I wanna say you guys are awesome! I've enjoyed reading through these forums off and on over the years and I have learned a lot! I believe I only have a couple posts on these forums so I am still a complete newbie when it comes to overclocking. I recently...

Hi guys, I NEED MY PC TO BE 100% RELIABLE AND NOT CRASH! Which is the better option......? Build 5900x + X570 Dark Hero with DDR4 3600Mhz CL14 RAM (RAM LATENCY 7.7 nanoseconds) OR..... 12700K + Z690 Maximum HERO + DDR5 4800Mhz CL36 (RAM LATENCY 15 nanoseconds) for now and UPGRADE RAM to...

Hi, I’ve just started a new build and I’m having an issue with no post. I’ve been through the regular checking of components and cables, built the pc outside and inside of the case with no luck. The pc powers up, motherboard LED flashes from CPU to DRAM and eventually hangs on DRAM, after...

Hi there. I have an Ason ROG z690 Formula, latest bios update, fitted with Corsair Dominator 5600. I'm unable to get the memory to run at it's full speed. If I set Auto it runs at 4700. If I manually set the speed the max I can get to is 5000 but it seems a little unstable. Neither of the...

So, I want to upgrade my whole pc basically. I've had it unchanged for about 6 years and it's showing its age on newer games. (I'm not gonna upgrade the GPU for now, as there is basically no stock). I want to get an i5 12600K and I was think of also getting DDR5 ram. Is it worth the extra...

Hello everyone, long time lurker, first time poster. So like a lot of other PC enthusiasts I am currently struggling with the whole DDR5 availability issue. I currently have (sitting in my closet) an i9 12900k // Asus Z690 Hero Motherboard (along with most of the other components) I am coming...

Do people reckon that price and compatibility with ddr5 will be viable with the launch of the next set of processors or will we be better to stick with ddr4 for longer? I was planning an upgrade at the start of the year but haven't managed yet so thinking I might just wait till the next set of...

AMD Confirms "Zen 4" on 5nm, Other Interesting Tidbits from Q2-2020 Earnings Call https://www.techpowerup.com/270414/amd-confirms-zen-4-on-5nm-other-interesting-tidbits-from-q2-2020-earnings-call - TSMC N5 process node; - AM5 boards; - DDR5 dual-channel mode per module - quad-channel per...

Sources: TechPowerUp / Cadence / via AnandTech

Source