• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

100% OC challenge?

Ok here we go. All fitted at stock speeds 2ghz 10 x 200. Stock VID as of CPU-Z 1.296. Test bed in sig.

E2180stock.jpg


3D 06 = 8757 http://service.futuremark.com/compare?3dm06=7916250
 
Last edited:
3.6Ghz 360 x 10 @ 1.648v Temps still ok but voltage getting very high.

E218036Ghz.jpg


Not stable enough for 3D mark at these settings, starting to struggle now. Will carry on tomorrow.
 
i know its not looking good. 3.8 would be nice. it just dont really seem to be getting any hotter with the amount of power been stuck through it.
 
lol its not really stable at that. and evan with mad volts the temps are good i just dont think its got it in it. might be worth abit if i can get it 3.6 stable without mad volts.
 
For 24x7 use I wouldn't put more than 1.55v through a 65nm CPU... while I have an E6600 here on water thats been running 1.65v for a couple of years I can't be sure how long they'd last normally.

If its not stable at 3.6 on ~1.65v then its probably not gonna help much pushing the volts up more.
 
I had over 100% out of my e6300, very briefly on the P35 I had for 1 day, swapped for x38 as P35 never had dual 16x express lanes.
Did 530x7 on it, was hot but stable.
 
You must log in or register to reply here.
Back
Top Bottom