1055T 95W retail?

mmj_uk · 16 Oct 2011 at 11:17

Are these genuine 95W models?

http://www.overclockers.co.uk/showproduct.php?prodid=CP-309-AM

Just double checking because I ordered a 95W before from another place and they sent me a crappy 125W instead, I think they were trying to pull a fast one to sell more 125w models.

Also has anyone bought one recently what kind of clocks you get?

BigAndy87 · 16 Oct 2011 at 14:13

according to the HDT55TWFGRBOX its should be a real 95w rated cpu, OEM and box versions was released can always DSR if they try and pull a fast one and send 125w

http://www.cpu-world.com/CPUs/K10/AMD-Phenom II X6 1055T - HDT55TWFK6DGR (HDT55TWFGRBOX).html

Skeese · 16 Oct 2011 at 14:20

Don't see why OCUK would mislead people...
No gain from miss-selling

mmj_uk · 16 Oct 2011 at 17:06

BigAndy87 said:
can always DSR if they try and pull a fast one and send 125w

Takes time though usually a couple of weeks.

Skeese said:
Don't see why OCUK would mislead people...
No gain from miss-selling

Well I think the place I ordered from before (not ocuk) were just trying to clear 125w stock and gambling on the fact that most people either wouldn't notice or not care enough to go through the lengthy return process.

Has nobody bought one of these yet? they used to be the dogs balls (even compared to 1090T) if you had a decent motherboard that could do 300bclk.

mmj_uk · 19 Oct 2011 at 09:30

Received one yesterday to keep me busy, not as good as the OEM one I had a while back which had a 1.275v VID iirc but not bad either compared to 1090T/1100T.

VID: 1.325v / NB: 1.15v

Does 4-4.1ghz watercooled easily on a Sabertooth 990FX with 1.5v but not been able to get IBT stable yet at 4.2ghz, even so can't argue with 4ghz hex for £115.

really need to make sure you have a good FSB overclocking board though what with the max multiplier at 14.

jennidc · 19 Oct 2011 at 11:00

What would be the best board to use with these chips for £120 or less

mmj_uk · 19 Oct 2011 at 11:33

jennidc said:
What would be the best board to use with these chips for £120 or less

I'd recommend a second hand Crosshair IV if you can get hold of one, not had much luck myself with 300BCLK on Gigabyte boards so you might be best off stumping up an extra £20 for an unlocked 1090/1100 if your motherboard isn't a Crosshair/Sabertooth.

Martini1991 · 19 Oct 2011 at 11:37

1.325VID?
Ew.

mmj_uk · 19 Oct 2011 at 11:39

Martini1991 said:
1.325VID?
Ew.

Yeah not that impressive by 95w standards but certainly clocks better than the 1100t i had a few months back and runs slightly cooler.

Strange how AMD seem to sell their best silicone as gimped 95W parts.

d_brennen · 19 Oct 2011 at 11:40

My Asus M4A89GTD Pro does 300MHz no probs. Have my 95 1055T at 3.5GHz (250*14) 24/7 @ 1.2v too, though I think I've been blessed with a peach of a chip/board.

mmj_uk · 19 Oct 2011 at 11:42

d_brennen said:
My Asus M4A89GTD Pro does 300MHz no probs. Have my 95 1055T at 3.5GHz (250*14) 24/7 @ 1.2v too, though I think I've been blessed with a peach of a chip/board.

Asus AMD boards a much better than Gigabyte from what I've seen, Gigabyte 990FX series seem to have massive voltage variations and back when I had 890FXA-UD5 it couldn't handle BCLK over 275 without giving memory warnings on post, Crosshair IV at the time was again solid though.

almighty15 · 19 Oct 2011 at 12:35

I'm after a 95w 1055T to put under phase cooling, My 1075T is 125w and the extra 30w is killing it I think.

Can't even put it up for sale in here as there's no longer a for sale section

mmj_uk · 19 Oct 2011 at 12:38

BTW is there any way to monitor CPU-NB voltage in Windows? I tried installing the Asus software but it won't install for some reason, just want to see if it's worth me enabling LLC for the NB or not.

Martini1991 · 19 Oct 2011 at 12:41

almighty15 said:
I'm after a 95w 1055T to put under phase cooling, My 1075T is 125w and the extra 30w is killing it I think.

Can't even put it up for sale in here as there's no longer a for sale section

Except there is.

mmj_uk · 19 Oct 2011 at 12:41

almighty15 said:
Can't even put it up for sale in here as there's no longer a for sale section

You might need to enable your Trust according to the FAQ.

almighty15 · 19 Oct 2011 at 13:02

mmj_uk said:
You might need to enable your Trust according to the FAQ.

Nope, Still nothing there..

Surveyor · 19 Oct 2011 at 13:46

almighty15 said:
Nope, Still nothing there..

It can take up to 24 hours to be given access.

almighty15 · 19 Oct 2011 at 13:49

Surveyor said:
It can take up to 24 hours to be given access.

I used to have access but not posted for a while..

Surveyor · 19 Oct 2011 at 13:51

almighty15 said:
I used to have access but not posted for a while..

If you've only just activated your trust it can take up to 24 hours to get access to the Members Market.

If you activated your trust a while go, but no longer have access to the Members Market, then you'll need to contact one of the site Moderators.