but you also have 5.5ghz 10900k!And i'm sat here with CL15 Corsair Dominator Platinum xmp 3000MHZ overclocked to 3400MHZ![]()
5.5 Ghz on a 10900k. Is that possible on all cores?but you also have 5.5ghz 10900k!
how about dial things back to get a more balanced system, 5.2 with maybe 4266mhz ram sounds nice
5.5 Ghz on a 10900k. Is that possible on all cores?
Yes mate. I just set it by core count. 5.5GHZ on 6 cores 5.4GHZ on 7 Cores and 5.3GHZ no AVX on 10 Cores. Vcore in bios set to Adaptive 1.28V, Under load 1.32V Die sense LLC 3
Ignore cinebench score, its low because I'm recording at the same time
So correct me if I'm wrong you might as well have set an all core of 5.3ghz as there will be virtually no scenario that will boost the cpu to 5.5 ghz.
Also your Vid is CRAZY high.
Cinebench single score seems to hold my CPU @ 5.5GHZ - 5.4GHZ. If i'm in Microsoft office, windows teams, web browsing I'm constantly hitting 5.5GHZ
Also VID is fine, it's not the voltage that its actually getting. it can "ask" 1.7V but will never actually get 1.7V. My vcore does hit 1.5v for a split second when there is no load on the CPU. This is just the nature of adaptive voltage though. I'm led to believe VID is what the cpu requests based on a voltage table set from intel. My vid is crazy high even if I set my cpu on stock.
Also this is the highest R23 I have got.
I prefer the higher core count of the 10900kWhat do you think of the new 11th Gen Intel Core i9 CPUs, mainly for gaming?
Agree, if 11900k had been 16 core, its a deal. 11700k at 10 core, makes sense? What are Intel thinking?I prefer the higher core count of the 10900k
no mate, liquid metal between IHS and CoolerThat is one impressive chip. Your temps are super low , did you delid in the end ?
Agree, if 11900k had been 16 core, its a deal. 11700k at 10 core, makes sense? What are Intel thinking?
no mate, liquid metal between IHS and Cooler
I have a 10850k, It clocks just fine but the temps are holding me back a little I'm at 5ghz all core at 1.31v core LL6, i have a full loop with 2x 360's in push pull. My 3080 is liquid metal and that brought temps down from 55 degrees to 40 degrees but I'm hesitant to do the cpu as the last cpu i did was a 5960x and it alloyed with the heat spreader to the point I had to lap it.
My cpu runs idles at 23c and maxes out at 63c it's overclocked to 4.5ghz with 1.1vcore. 10th gen i7
Overclocked to 4.5 ? . My stock 10700k ran at 4.7ghz all core out of the box at stock settings. Do you mean you're under volting and underclocking ?
It should be able to hit 5GHZ I reckon. The issue they are having with the 10nm stuff is that they are not able to achieve high clocks. However, the 11th gen is a backport of the 10nm so it is still on the 14nm which should enable it to OC just fine.So it says the maximum is 8 cores and 16 threads for 11th Gen Intel CPUs.
The flagship, the Core i9-11900K has eight cores and 16 threads. Base clock of 3.5 GHz with 5.3GHz Bost clock (usually on one core only). So likely 4.7GHz across all cores.
You reckon you can overclock all cores to 5GHz?
I have a 10850k, It clocks just fine but the temps are holding me back a little I'm at 5ghz all core at 1.31v core LL6, i have a full loop with 2x 360's in push pull. My 3080 is liquid metal and that brought temps down from 55 degrees to 40 degrees but I'm hesitant to do the cpu as the last cpu i did was a 5960x and it alloyed with the heat spreader to the point I had to lap it.
Not stable under 1.30v? Mine does 5ghz @ 1.260v rock solid, i know they are all different. Temps good with cheapo 240mm aio, but thinking of getting a quality 360mm as i reckon it will do 5.3ghz.I have a 10850k, It clocks just fine but the temps are holding me back a little I'm at 5ghz all core at 1.31v core