1900XT-X
- Thread starter drak3
- Start date
Are you thinking of cooling CPU and GPU with a PA120.3 and DDC Pump or are you cooling one at the moment?
Reason I ask Is this weekend hopefully going to try to set up my 2 XT-X Cards, CPU and NB with a DDC Pro pump and gulp a Black Ice Stealth II.
I haven't a clue whether the temps will be OK, it's just a test rig to see.
Reason I ask Is this weekend hopefully going to try to set up my 2 XT-X Cards, CPU and NB with a DDC Pro pump and gulp a Black Ice Stealth II.
I haven't a clue whether the temps will be OK, it's just a test rig to see.
drak3 said:
Maybe some help to you.
I have a x1900xt at 749/801 with 1.6cv on it's own loop with a single rad with a low speed fan. mcw60 waterblock and aquaextreme 50z.
I was seeing load temps around 60 degrees. however last night I was in the case and saw quite a bad kink so I stripped out my loop and replaced some tubing. I also re-seated the waterblock which didn't look like it was making great contact. I will post updated load tmeps tonight for you.
Ok have the following setup:-
PA 120.3 with the extra shroud.
X1900xtx oc'd to infinity.... and beyond
Opteron 146 @ 3ghz
Laing D5
Nexus fans
EK waterblock cooling gfx card and memory
The gfx is idleing at 35c and after a good blast of gaming, say Supreme Commander it hits 42c. Before on the stock cooler the card was crossing 90
(before clocking)
PA 120.3 with the extra shroud.
X1900xtx oc'd to infinity.... and beyond
Opteron 146 @ 3ghz
Laing D5
Nexus fans
EK waterblock cooling gfx card and memory
The gfx is idleing at 35c and after a good blast of gaming, say Supreme Commander it hits 42c. Before on the stock cooler the card was crossing 90
(before clocking)Very encouraging info 
The plan is to have an EK full cover on the 1900xt-x and a fuzion on the CPU in one loop with an PA120.3 (3xnexxus).
I guess it will be fine then.
btw, what clocks are "infinity"
?
I never OC gfx and to be honest I dont even know from were to start, but with such nice temps when I finish the loop (waitting some parts still from US) I must be stupid not to. The CPU is clocked however, 4400+ X2 939 @ 2.5Ghz - 250FSB - 1.4v core - 1:1 ram on air. (Can do more, but corsairs wont do 1:1 beyond 250Mhz at 2.5-3-3-7 - 1T.
The plan is to have an EK full cover on the 1900xt-x and a fuzion on the CPU in one loop with an PA120.3 (3xnexxus).
I guess it will be fine then.
btw, what clocks are "infinity"
?I never OC gfx and to be honest I dont even know from were to start, but with such nice temps when I finish the loop (waitting some parts still from US) I must be stupid not to. The CPU is clocked however, 4400+ X2 939 @ 2.5Ghz - 250FSB - 1.4v core - 1:1 ram on air. (Can do more, but corsairs wont do 1:1 beyond 250Mhz at 2.5-3-3-7 - 1T.