2600k

Geeman1979 · 2 Aug 2011 at 20:16

Well if your goal is 4.8 its your CPU go for it.

Leeroy123 · 2 Aug 2011 at 20:52

well ok im on 4.8 now. the volts being used is set at 1.448. just running prime. temps are getting up a bit now late 70's . http://imageshack.us/photo/my-images/696/unlednvj.png/ , ill leave this running an hour now. then see where i am from there. been running 25 mins temps are still same as in pic, not budging.

Ok its just got 50 minutes and i stopped it. Will give it a proper test overnight. temps mam where hitting. 74 . 82 . 81 . 80. Seems you where right clum i didnt need as much as 1.45v

If it passes overnight and temps stay where they are, i might go for 4.9 lol

bulldog147 · 2 Aug 2011 at 21:20

1.45V for 4.8GHz ? oh palm my head!

Leeroy123 · 2 Aug 2011 at 21:22

Yeah my chip isnt the best is it. It will still do it but vcore is having to be high

bulldog147 · 2 Aug 2011 at 21:29

Leeroy123 said:
Yeah my chip isnt the best is it. It will still do it but vcore is having to be high

try set vcore on normal and put offset at +0.015 and put vccio at 1.160v, vccsa 1.140v, cpu pll 1.700v and dram 1.600v and the rest on auto! forget to add one more disabled the power saving on the feature too.

Leeroy123 · 2 Aug 2011 at 21:30

ok mate ill write that down, then save my settings and give that a go. what do you class as vcore on normal

bulldog147 · 2 Aug 2011 at 21:36

Leeroy123 said:
ok mate ill write that down, then save my settings and give that a go. what do you class as vcore on normal

the vcore is greyed out if put normal mode on it with the LLC disabled. It work beauty on mine 5.0GHz with that setting

Leeroy123 · 2 Aug 2011 at 21:39

You cant disable LLC on my board, and the vcore doesnt go greyed out mate.

ChrisD. · 2 Aug 2011 at 21:43

Would these settings work on my board? I'd like to have VCore drop when not at load as my PC is on 24/7.

I'm using 1.36 manual for 4.5GHz.

bulldog147 · 2 Aug 2011 at 21:46

all board are different settings

ChrisD. · 2 Aug 2011 at 21:47

CPU-Z shows 1.376V and Core Temp shows 1.39V under load.

What would I need to set my offset to?

bulldog147 · 2 Aug 2011 at 22:24

bulldog147 said:
try set vcore on normal and put offset at +0.015 and put vccio at 1.160v, vccsa 1.140v, cpu pll 1.700v and dram 1.600v and the rest on auto! forget to add one more disabled the power saving on the feature too.

My cpuz showing idle at 1.068v and under load it stayed at 1.380v

Leeroy123 · 3 Aug 2011 at 01:03

well this is all good for me at 4.8. just gamed for hours , gonna leave it on all night priming. 1.445v though

but as i say using offset so isnt so bad. I am not gonna go any higher with this overclock.