3D Prints Gallery

[HB]Rugrat · 24 Nov 2025 at 15:43

I decided to decorate my new case with a Warcraft figure...

... only to find it was too large to fit

Quite pleased with the bronze finish though.

I went with another villain for the case instead (I'm still painting it, it needs a bit of touching up).

Too Tall · 26 Nov 2025 at 18:41

BeelzebubUK said:
Gridfinity multibin storage case for all my M2 and M3 bolts. All printed in PETG on the Centauri Carbon. The labels were printed in white and then just sharpied the embossed text rather than try multi-colour. It's very sturdy. Middle bin is grey because I ran out of the green with about 20g to go

It's stackable as well if you need more than one.

Gridfinity Storage Boxes by Pred - Free 3D Print Model - MakerWorld

Download this free 3D print file designed by Andrianopolino. This is a real example how cool is the gridfinity universe. This box was realized by Pred I strongly suggest you to check on his profile: link My aim is to contain in one place all boxes I'm going to print going forward. IMPORTANT: Do...

www.makerworld.com

Gridfinity Bin with Printable Label by Pred (parametric) by Pred | Download free STL model | Printables.com

This looks great, might look for similar to store my modelling paints.

Starting to wish I didn’t sell the X1C

Mr.Cookie · 30 Nov 2025 at 22:54

ElliorR · 3 Dec 2025 at 16:32

Trig · 3 Dec 2025 at 18:28

Its that time of the year I guess...

How much poop?

Rob_B · 3 Dec 2025 at 18:38

After a full night drinking milk, sherry and mince pies? Quite a lot I imagine

krisboats · 3 Dec 2025 at 23:27

Trig said:
Its that time of the year I guess...

How much poop?

not much, its an assembled print.

ElliorR · 4 Dec 2025 at 06:53

Trig said:
Its that time of the year I guess...

How much poop?

Just the poop before each print starts as this model is printed in each colours pars and assembled.

Cyclone · 6 Dec 2025 at 03:20

These are about 5" tall. I'm tempted to reprint them at 12"

Cyclone · 16 Dec 2025 at 18:32

Mr.Cookie · 22 Dec 2025 at 00:35

Had a play with lilithophane, quite impressed

Ace Modder · 22 Dec 2025 at 09:37

Plunk13 · Sunday at 10:48

Predator model printed at 150%. After some failed prints and days of prepping, several painting days over December, it's pretty much done. The model has the predator holding a spear but I replaced it with a skull and spine.

Trig · Sunday at 16:56

Nice, wheres the model from?

Plunk13 · Sunday at 17:03

most of the ones I get are from specialiststl.com

roman59 · 2026-01-06T20:41:09+0000

ElliorR said:

H2S by any chance ?

I placed an order for one today, it should arrive by Friday this week

ElliorR · 2026-01-06T21:00:56+0000

roman59 said:
H2S by any chance ?

I placed an order for one today, it should arrive by Friday this week

Absolutely. Great printer.

When mine was delivered the driver asked me to help him carry it to my front door. I did as I’m very nice, plus I didn’t want him to drop it, but he never helped me get it in doors. It’s heavy.

One thing I recommend is remove the hot end regularly and check for build up. I discovered last week that a build up of filament can cause the hot end to stick to the heater. I expect this is because I print a lot of petg so I’m just going to use my spare 0,4mm hot end for pla to see how that goes.