1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

4P build problem.

Discussion in 'Team OcUK Distributed Computing Projects' started by Streetlight, Nov 20, 2015.

Page 2 of 2
    Dec 23, 2015 at 10:42 PM
      #21
  1. Streetlight

    Hitman

    Joined: Dec 5, 2010

    Posts: 569

    Location: The Moon

    Trust
    2. Dec 23, 2015 at 11:37 PM
      #22
  2. JTG

    Associate

    Joined: Dec 23, 2015

    Posts: 13

    Sorry Dyslexic can be troublesome
    TPC

    should be the same on mint as ubuntu ...(should)
    and it wont "push" your system past your current over clock ... it will just Lock
    the processor P-State, so it never changes to something less than, Turbo boost
    Full load
     
    Last edited: Dec 23, 2015
    Trust
    3. Dec 24, 2015 at 12:03 PM
      #23
  3. Streetlight

    Hitman

    Joined: Dec 5, 2010

    Posts: 569

    Location: The Moon

    Think I have it installed....

    have this....on the nodes, all saying the same thing.

    -- Node: 3 Core 7
    core 7 pstate 0 (pb0) - En:1 VID:37 FID:10 DID:0.00 Freq:2600 VCore:1.0875
    core 7 pstate 1 (pb1) - En:1 VID:37 FID:10 DID:0.00 Freq:2600 VCore:1.0875
    core 7 pstate 2 (p0) - En:1 VID:41 FID:7 DID:0.00 Freq:2300 VCore:1.0375
    core 7 pstate 3 (p1) - En:1 VID:43 FID:5 DID:0.00 Freq:2100 VCore:1.0125
    core 7 pstate 4 (p2) - En:1 VID:45 FID:2 DID:0.00 Freq:1800 VCore:0.9875
    core 7 pstate 5 (p3) - En:1 VID:46 FID:0 DID:0.00 Freq:1600 VCore:0.9750
    core 7 pstate 6 (p4) - En:1 VID:48 FID:12 DID:1.00 Freq:1400 VCore:0.9500
    -- Node: 4 Core 0
    core 0 pstate 0 (pb0) - En:1 VID:35 FID:10 DID:0.00 Freq:2600 VCore:1.1125
    core 0 pstate 1 (pb1) - En:1 VID:35 FID:10 DID:0.00 Freq:2600 VCore:1.1125
    core 0 pstate 2 (p0) - En:1 VID:39 FID:7 DID:0.00 Freq:2300 VCore:1.0625
    core 0 pstate 3 (p1) - En:1 VID:42 FID:5 DID:0.00 Freq:2100 VCore:1.0250
    core 0 pstate 4 (p2) - En:1 VID:44 FID:2 DID:0.00 Freq:1800 VCore:1.0000
    core 0 pstate 5 (p3) - En:1 VID:46 FID:0 DID:0.00 Freq:1600 VCore:0.9750
    core 0 pstate 6 (p4) - En:1 VID:48 FID:12 DID:1.00 Freq:1400 VCore:0.9500

    --- Node 0:
    Processor Maximum PState: 1
    Processor Startup PState: 6
    Processor Maximum Operating Frequency: 3200 MHz

    Minimum allowed VID: 123 (0.013v) - Maximum allowed VID 19 (1.312v)
    Processor AltVID: 50 (0.925v)

    not sure what to do now.
     
    Trust
    4. Dec 26, 2015 at 2:49 PM
      #24
  4. JTG

    Associate

    Joined: Dec 23, 2015

    Posts: 13

    if you have it installed correctly
    you need to start it

    open a terminal window
    and type in the command

    sudo tpc -psmax 1

    seeing you are overclocking

    you should also have OCNG tools installed ...
    so u can do
    sudo clockspeed

    not sure this will verify anything as i dont overclock currently

    but i do have the OCNG tools installed
    even though i didnt flash the bios

    what i do is a before and after

    sudo clockspeed
    sudo -psmax 1
    sudo clockspeed

    and that shows the difference
     
    Last edited: Dec 26, 2015
    Trust
Page 2 of 2