5800x | msi X570 Unify | corsair Dominator Platinum CMD32GX4M4A2800C16 Cant Boot above 2133
- Thread starter bralph84
- Start date
Right ryzen can be funny with 4 sticks so try 2 sticks first I no it's a pain but try 2 2nd and 4th slot away fro cpu and set xmp in bios and see what you get
Associate
- Joined
- 3 Feb 2012
- Posts
- 2,269
- Location
- Bath
Do you have the RAM in the correct slots (A2 and B2 usually)? Using A1 and B1 only can cause problems.
Again, I expect you have them in right, but worth an ask.
EDIT whoops sorry, failure to read thread idiot alert...
Again, I expect you have them in right, but worth an ask.
EDIT whoops sorry, failure to read thread idiot alert...
Associate
- Joined
- 3 Feb 2012
- Posts
- 2,269
- Location
- Bath
TBH I would expect/hope for some BIOS revisions from the mobo manufacturers fairly soon- quite a few issues, it seems.
ive managed to use ryzen master to get to 2800mhz
Edit now at 3000 16 18 18 36
edit as ive reached max posts
Crashing again with this error and no black screen
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video3
Graphics Exception: ESR 0x404490=0x80000001
The message resource is present but the message was not found in the message table
Edit now at 3000 16 18 18 36
edit as ive reached max posts
Crashing again with this error and no black screen
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video3
Graphics Exception: ESR 0x404490=0x80000001
The message resource is present but the message was not found in the message table
Last edited:
are you sure your ram doesnt have issues? what CPU u using before 5800X?
i would test out those ram first. 2 sticks at a time. I think the latest BIOS is for SAM so probably dont use. use the one that is AGESA 1.1.0.0 Patch C
do a CMOS clear install 2 sticks ram in the A2, B2 slots only then go into BIOS and Load default and F10 out let the computer boot. once you are presented with splash press Del or F2 to get into BIOS.
then dial in CPU PPL L3 and CPU NB PPL L3
then manually select RAM speed for 2800MHz and set the IF to 1400. then set your Vram to 1.4V and Vsoc to 1.1 VIDO and VCCD to 1.05 and leave all the timing etc auto.
Your RAM is old, so it may have compatibility issues. even if you can OC in ryzen master you are not going to get stability.
best of luck.
i would test out those ram first. 2 sticks at a time. I think the latest BIOS is for SAM so probably dont use. use the one that is AGESA 1.1.0.0 Patch C
do a CMOS clear install 2 sticks ram in the A2, B2 slots only then go into BIOS and Load default and F10 out let the computer boot. once you are presented with splash press Del or F2 to get into BIOS.
then dial in CPU PPL L3 and CPU NB PPL L3
then manually select RAM speed for 2800MHz and set the IF to 1400. then set your Vram to 1.4V and Vsoc to 1.1 VIDO and VCCD to 1.05 and leave all the timing etc auto.
Your RAM is old, so it may have compatibility issues. even if you can OC in ryzen master you are not going to get stability.
best of luck.
Crashing again with this error and no black screen
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video3
Graphics Exception: ESR 0x404490=0x80000001
The message resource is present but the message was not found in the message table
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video3
Graphics Exception: ESR 0x404490=0x80000001
The message resource is present but the message was not found in the message table