600T Case Fans

Associate
Joined
20 Apr 2012
Posts
12
I have a corsair 600T, recently the top fan has started to make a rather annoying sound and sense its almost 1-2 years old i figured it times to replace it "along with the front one as well".

http://www.corsair.com/us/clear-textured-200mm-white-led-case-fan.html
Is the fan the case currently uses, i would idealy like to replace it with another 200MM Fan but without LEDs "i dislike leds :)".

I found

http://www.corsair.com/us/black-200mm-case-fan.html which seamed to fit the job but from what i could find no UK site sells it.

So i though i would open this question to the forums so more experienced users could help me out.

Only thing i know is the fan needs to be 20MM in height, and most fans i saw are 20mm+

http://www.overclockers.co.uk/showproduct.php?prodid=FG-006-BX&groupid=701&catid=2331&subcat=2335 is the only one i could find on overclockers but the specs seam kinda bad "though i don't know a great deal about case fans"
 
Soldato
Joined
9 Mar 2009
Posts
2,885
Location
-
use 2 x120mm for the roof or:
bitfenix spectro (non pro) requires long bolts/screwsrubber mount iirc

for the front get a 200mm bitfenix spectre pro of your choice
 
Associate
Joined
14 Jun 2011
Posts
371
Location
Wolverhampton
Does your fan controller still work?

I have been reading up on the 600t lately as im due to get one and if you are changing the stock fans and connecting new ones to controller then make sure they don't draw too much power and overload the controller as it has a tendency to die...
 
Associate
OP
Joined
20 Apr 2012
Posts
12
i honestly wouldnt know. I have not changed the stock ones.

Idealy i tryed to get a replacement or another one desgined for the 600T as listed above, but they are not sold anywhere in the UK. So i would need to pay 30$ p&p which is kinda sucky.
 
Soldato
Joined
9 Mar 2009
Posts
2,885
Location
-
My 600t fan controller worked fine when adding the spectre pro 200mm to the front + 2 x 120mm corsair af fans to the roof.

Most people with a 600t upgrade the stock fans because they are rubbish.

edit: with the 600t fan controller you have to be careful that you either keep hold of the plastic guards for the 2 pin fan connectors and use them on all unused connections or just make sure the unused 2 pins do not contact bare metal in the case while the fan controller is powered (system on). I'll bet you 5 dollah loads of people have fried the controller doing that.
 
Last edited:
Associate
Joined
7 Aug 2010
Posts
1,329
Location
Chelmsford
My 600t fan controller worked fine when adding the spectre pro 200mm to the front + 2 x 120mm corsair af fans to the roof.

Most people with a 600t upgrade the stock fans because they are rubbish.

edit: with the 600t fan controller you have to be careful that you either keep hold of the plastic guards for the 2 pin fan connectors and use them on all unused connections or just make sure the unused 2 pins do not contact bare metal in the case while the fan controller is powered (system on). I'll bet you 5 dollah loads of people have fried the controller doing that.

but the inside of the case is painted anyway

I have a spectre pro as intake http://www.overclockers.co.uk/showproduct.php?prodid=FG-019-BX&groupid=701&catid=2331&subcat=2335

for the exhaust get 3 corsair af120s
 
Top Bottom