Ok, had my Htpc for around 4-5 month now but its never really been up and running properly, it was more of a case of just a pc hooked to the telly for a while and none of it was set as a dedicated media center.
The other day i decided to strip it down, spend some time on cable managemant and get the software running the way it should, i formatted the lot and started fresh with a little more direction and purpose this time.
Ok specs are pretty important so here it is,
Mediaportal front end with streamedMP, moving pictures and my tv series.
C2D E5300 @ stock
2GB DDRII
asus P5N7A-Vm, Nvidia GF9300 ic with 256mb shared memmory
80GB laptop sata HDD with vista 32 Os
1tb seagate lp 5900Rpm drive for storage
no blu-ray yet though it will be coming in a month or so.
Onkyo 507 reciever
cable managemant was a bit of a pig!
Codecs:
FFDshow
Ac3filter
MPcHc
I have spdif passthrough for dts over hdmi working though this took a bit of tweaking ffdshow and Ac3, ive set all the relavant codecs in Mp.
Now i have seen mention of coreAvc though this isnt free would this be a better codec to have for H.264? how much is it and is it worth the money on my set-up, could i take full advantage?
Also is thre any settings/tweaks i can use for software to improve performance and PQ aswell?
Is there any other software i should get to have a more complete Htpc as this is a pretty much standerd instalation at the minute, just what you see above really and lastly any pointers ?
Thanks for looking in and any help/tips you have.
The other day i decided to strip it down, spend some time on cable managemant and get the software running the way it should, i formatted the lot and started fresh with a little more direction and purpose this time.
Ok specs are pretty important so here it is,
Mediaportal front end with streamedMP, moving pictures and my tv series.
C2D E5300 @ stock
2GB DDRII
asus P5N7A-Vm, Nvidia GF9300 ic with 256mb shared memmory
80GB laptop sata HDD with vista 32 Os
1tb seagate lp 5900Rpm drive for storage
no blu-ray yet though it will be coming in a month or so.
Onkyo 507 reciever
cable managemant was a bit of a pig!





Codecs:
FFDshow
Ac3filter
MPcHc
I have spdif passthrough for dts over hdmi working though this took a bit of tweaking ffdshow and Ac3, ive set all the relavant codecs in Mp.
Now i have seen mention of coreAvc though this isnt free would this be a better codec to have for H.264? how much is it and is it worth the money on my set-up, could i take full advantage?
Also is thre any settings/tweaks i can use for software to improve performance and PQ aswell?
Is there any other software i should get to have a more complete Htpc as this is a pretty much standerd instalation at the minute, just what you see above really and lastly any pointers ?
Thanks for looking in and any help/tips you have.