αclass 2.0 - PARVUM L1.0
- Thread starter JR23
- Start date
αclass 2.0 by JR23
Finally I can show you all the first retail Parvum ATX case complete with a full set of components. Aside from mounting the fan controllers and reservoir, simply by hand drilling 10 additional holes, no changes have been made to the case itself. This was intentional not only due to the time constraints but also to demonstrate what could be achieved in its retail form. Completed in under a week to attend i55 this has been an extremely fast paced build for me, but even so very few compromises have been made. I still found the time to pick up some new skills, re-pinning an entire PSU, doing some of my own shrinkless cables and making split wires for the first time. It was a pleasure to be heavily involved in the design of the case and I can't wait to see what other builders and modders will do with it in the near future.
Parvum Systems L1.0
Intel Ivy Bridge-E i7-4820k
ASUS Rampage IV Formula
ASUS Xonar Essence STX
EVGA GTX780 Classified x3
Corsair Dominator Platinum 4x4GB 2133C9
Corsair Neutron GTX 240GB RAID0
Seasonic P Series 1200W Platinum
Alphacool NexXxos ST30 360
Alphacool NexXxos UT60 480
Alphacool NexXxos Monsta 360 x2
Alphacool Hard Tube 10/13mm Acrylic
Aquacomputer Aquaero 5 LT x2
Corsair Quiet Edition SP120 x16
Corsair Quiet Edition AF120 x2
EK Supremacy EVO Clean CSQ Nickel/Plexi
EK FC780 GTX Classy Clean CSQ Nickel/Plexi x3
EK FC780 GTX Classy Backplate x3
EK FC-Bridge Triple Parallel
EK D5 Vario X-TOP Clean CSQ Plexi
EK RES X3 250 Black Acetal
EK RES X3 Multiport Top Black Acetal
EKWB, Primochill and Bitspower fittings
Mayhems X1 Red Premix Coolant
MDPC-X Red, Grey mkII, Shade 19 and Black sleeve
JR
Finally I can show you all the first retail Parvum ATX case complete with a full set of components. Aside from mounting the fan controllers and reservoir, simply by hand drilling 10 additional holes, no changes have been made to the case itself. This was intentional not only due to the time constraints but also to demonstrate what could be achieved in its retail form. Completed in under a week to attend i55 this has been an extremely fast paced build for me, but even so very few compromises have been made. I still found the time to pick up some new skills, re-pinning an entire PSU, doing some of my own shrinkless cables and making split wires for the first time. It was a pleasure to be heavily involved in the design of the case and I can't wait to see what other builders and modders will do with it in the near future.
Parvum Systems L1.0
Intel Ivy Bridge-E i7-4820k
ASUS Rampage IV Formula
ASUS Xonar Essence STX
EVGA GTX780 Classified x3
Corsair Dominator Platinum 4x4GB 2133C9
Corsair Neutron GTX 240GB RAID0
Seasonic P Series 1200W Platinum
Alphacool NexXxos ST30 360
Alphacool NexXxos UT60 480
Alphacool NexXxos Monsta 360 x2
Alphacool Hard Tube 10/13mm Acrylic
Aquacomputer Aquaero 5 LT x2
Corsair Quiet Edition SP120 x16
Corsair Quiet Edition AF120 x2
EK Supremacy EVO Clean CSQ Nickel/Plexi
EK FC780 GTX Classy Clean CSQ Nickel/Plexi x3
EK FC780 GTX Classy Backplate x3
EK FC-Bridge Triple Parallel
EK D5 Vario X-TOP Clean CSQ Plexi
EK RES X3 250 Black Acetal
EK RES X3 Multiport Top Black Acetal
EKWB, Primochill and Bitspower fittings
Mayhems X1 Red Premix Coolant
MDPC-X Red, Grey mkII, Shade 19 and Black sleeve
JR
Associate
It's... beautiful..
drool.
drool.
Associate
That looks amazing. Once again JR23 you have made a stunning rig. 
Great bit of MDPC-X and Pexon swag!
That looks amazing. Once again JR23 you have made a stunning rig.
Thanks guys! It's great to be repping a Parvum as my main rig now.
JR
Associate
Any particular reason you chose to mount the reservoir in the back rather than out front? I guess this way is more unconventional, plus I like the SSD mounting 
Associate
This is an awsome system built, really great job you have done with this built!!!!