Adding 2gig ram

[BigBazz]

I have an OCUK Ultima system :
Spec.
Abit IP-35 Pro
Intel Q6600 @ 2.40GHz 3.40GHz
Crucial Ballistix 2GB (2x1GB) DDR2 PC2-8500C5 1066MHz
OCUK 8800GTX
WD Caviar Blue 500GB SATA-II 16MB Cache - OEM (WD5000AAKS)
Vista Home Premium 32bit

The Bios setup is:
External clock - 378Mhz
Dram speed 1:1 20
PCI Express clock 101MHz
CPU core - 1.45V
DDR2 voltage 2.200v
MCH voltage 1.29v
ICH 1.05v voltage 1.09v
ICHIO Voltage 1.55v
cas latency -5
Ras to cas -5
Ras precharge -5
precharge -15

I want to add 2GB more ram, (i know 32bit Vista can only detect upto 4GB probably less) my question is will i have to change any bios setting such as External Clock ect when the Ram is installed ? If so any advice would be very much apprciated .

Thanks

 

[mda96bjh]

Always safest to clear the CMOS prior to a RAM upgrade....then once all sticks have been detected set up your timings as you like them

 

[RJC]

You may need to re-do your overclock and up the MCH voltage, when had 4 gig installed I needed the MCH voltage at 1.41v!