Adding more RAM to existing setup (TeamGroup Vulcan)

[teb]

Hi there,

I'm looking at doubling my RAM. I currently have this installed:
TeamGroup Vulcan RED 8GB (2x4GB) DDR3 PC3-19200C10 2400MHz Dual Channel Kit (TLD38G2400HC10TDC01)

Features:-
- Module Type 240Pin Unbuffered DIMM Non ECC
- CL-tRCD-tRP-tRAS 10-11-11-31
- DRAM Density 128x8 / 256x8 / 512x8
- Data transfer bandwidth 19,200MB/Sec (PC3 19200)
- Heat Sink Aluminum heat-sink
- Working voltage 1.55V-1.65V
- Warranty Lifetime warranty
- Haswell & AMD Richland compatible

It's running at 2400mhz, 10-11-11-31 timings.

Unfortunately the product seems to be discontinued.

Would the following work with my existing RAM if I were to increase the timings across the board to 11-13-13-35?

https://www.overclockers.co.uk/team...nnel-kit-tlred38g2400hc11cdc01-my-061-tg.html

Features:-
- Module Type 240Pin Unbuffered DIMM Non ECC
- CL-tRCD-tRP-tRAS 11-13-13-35
- DRAM Density 128x8 / 256x8 / 512x8
- Data transfer bandwidth 19,200MB/Sec (PC3 19200)
- Heat Sink Aluminum heat-sink
- Working voltage 1.55V-1.65V
- Warranty Lifetime warranty
- Haswell & AMD Richland compatible

Thanks in advance!

 

[Disco_P]

For the price it might be worth selling and buying a 16GB kit. They start at £60.

 

[setter]

Should work fine adding the C11 kit and running the current one at the same slacker timings. The vulcan red c10 kit was something of a limited production run. I searched high and low for another 8gb of it but no joy.

 

[teb]

Thanks for the quick replies. I'll definitely consider both options. Cheers!