• Notice regarding image hosts and attachments. See here.

Advice needed, Desktop has died.

Associate
Joined
21 Aug 2007
Posts
50
Yesterday my main comp which has been working fine for the last 2 years died, and i am looking for advice as to why.

I was just on the computer when it died, there was no warning, the power just went off, and refused to come back on. I opened it up to take a look and every few seconds the fans would flicker for an instant and move about a centimeter and the fan lights would be on instantaneously.
It refused to turn back on.
I reseated all the components and checked that everything was plugged in properly, and tried again.

This time something went pop, and annoyingly i am not sure what.
Since then i have unplugged it and have not turned it back on, as i am wondering wht course of action to take. The poping noise was definately electrical in nature.

I believe this to be a PSU or a Motherboard issue, as i cant think of anything else that would cause this sort of power failure, but i am worried that the pop could have been a second problem, rather than an extension of whatever caused the original power problem.

Just wondered what you guys would recommend i do to get this fixed, and i would really appreciate any adice you have.

The rig has been working fine for the past 2 years and there was not any overheating that i could see, so i dont thnk that was the problem.

What should my next course of action be??
 
I'd guess it was a PSU problem, usually anything down to a power issue stems from PSU problems.

Do you know what temperatures your machine was running at before it shut down?
 
Yeh , sounds like your PSU has gone, just hope it hasn't taken any other parts with it. Do you have a PSU from a different computer you could test with ?
 
It was not hot to the touch, bt i cant b sure.
The pop does have me worried though.
I do have a spare comp which is older, will there be any issues with the voltage/ampage if i just swap the probably blown PSU into the old comp to see if it works, since i doubt the PSU in the old comp will b gd enough to run the newer machine.
 
Back
Top Bottom