Another newbie...

mystes

mystes

mystes

Associate
Joined
17 Feb 2010
Posts
155
I got fed up with H70 and sold it. So now running stock cooler :eek: and want to watercool CPU. Not sure about GPU and mobo.
I have 800D. I've i7 950, Rampage III extreme and Gainward gtx 580 Phantom 3GB. I did spend last 2 weeks on ocuk forum and others looking for components and some advice. So far have in my basket:

- OcUK Tech Lab - D5 Vario Pump & Alphacool HF D5 Top Value Combo
- EK Supreme HF CPU Waterblock - Nickel Acetal
- XSPC EX360 120mm Radiator - Black
- Mayhems Pastel - Ice White Coolant 1L x2
- Masterkleer Hose Pack PVC 15,9/11mm (7/16ID) Clear 3.3m
- Bitspower Compression Fitting 7/16" [16/11mm] - G1/4" - Matt Black (BP-MBCPF-CC6) x8

No worries, I didn't miss reservoir. I thought to get one of these:
- TNK-501 Single 5.25in Bay Reservoir

But I do have a question about rads. Is it actually worthy to spend another £33 to get Hardware Labs Black ICE SR-1 360 Radiator ?
 
Last edited:
You've done you're research!

That's EXACTLY what id spec (except I'd use Bickel plexi instea of that horrid acetal you infidel :D)

The SR1 is probably better than the EX, and I'd say if you have the space and money, go for it!

Re the res, might be Easier to go for one of the ones OcUK stock, the EK dual bay spin res is my fav :D

I would certainly cool your gfx card, but the warranty will be voided :(

And any reason you chose bitspower fittings?
 
Re CPU block - I didn't want full nickel so went with nickel acetal. I'll have to check youtube , how does plexi look with white coolant.
I'll have a think about radiator. It is another £30.
Re bitspower fittings - I do like the look of them, but I have to admit they are expensive. Would you recommend something different?
 
Nickel plexi looks amazing. Lgevans has ordered some white collar with his nickel plexi block (hopefully there will be pics on Friday)

EK compression fittings are just as good. Maybe use bitspower only for the fittings you can see?
 
I didn't thought about it - I think this will be the right way to go.
You did say that you would cool gfx. I did some research about this as well, but gainward is not reference card so there is not full water block for them. I know that EK do EK-FC5X0 GTX GW series but compatibility is only visual.
 
I'll look into that.
What about motherboard? Is it worthy to do so? And probably one rad will be not enough for that loop.
 
lgevans said:
Good luck with the build...

Have a butchers at my recent build. One BIG tip though... DO NOT over tighten the compression fittings. You will be very tempted to as I did but you will have to argue with a pair of pliers or two to get them open again. Finger tight is plenty and I haven't sprung a leak yet :)

http://forums.overclockers.co.uk/showthread.php?t=18352122

Merry Christmas :D
Click to expand...

I've seen your build before. :) Yeap, I know about over tighten compression fittings.
 
Last edited:
Just have placed order:
OcUK Tech Lab - D5 Vario Pump & Alphacool HF D5 Top Value Combo
1
£67.28

Hardware Labs Black ICE SR-1 360 Radiator
1
£66.48

EK Supreme HF CPU Waterblock - Nickel Plexi
1
£45.12

XSPC Single 5.25” Bay Reservoir - Multi Fascia
1
£19.78

Mayhems Pastel - Ice White Coolant 1L
2
£23.74

Masterkleer Hose Pack PVC 15,9/11mm (7/16ID) Clear 3.3m
1
£8.62

Bitspower Compression Fitting 7/16" [16/11mm] - G1/4" - Matt Black (BP-MBCPF-CC6)
4
£28.48

Akasa AK-CB002 PWM Fan Splitter Cable
1
£2.84


Sub Total:
£262.31

DPD Next Day Parcel
Shipping:
£0.00


Total Vat:
£52.46


Total inc Vat:
£314.77

Unfortunately someone - R.C.Anderson 'stole' last SR-1. Will gonna have to wait for another one to arrive.
The rest of the fittings and GPU block I'll get from Ek directly - actually I did send an email to Rich, will see what he can do for us :)
I do have some idea - it has been done before - to get straight line tubings. Unfortunately this mean A LOT of fittings - and they are not coming cheap. Maybe I'll switch to ek at all.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom