Anyone ever put a computer in a box and used it?

Soldato
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
things keep changing in my house and my computer gets the blunt of it a lot of the time, so may have to relocate it back upstairs, but to save using my viglen case again(tv unit would house it no problem) I thought I could cut holes in the case box that's next to my tv in room just sitting there with my Pi and bits in lol, its something I'm doing with my Pi in a small pizza box, but obviously my computer needs more cooling.

Even if I cut holes on the side or back where my fans face would I run in to any heat issues? Lid would be closed until I need to get at it. I figured if I do this daft idea I'd still use the machine ha.
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
Thanks for reply.

Sorry I meant inside its computer case inside the box the case came in, but after I posted this I went and did it anyways lol, it's a messy job as I did it quickly, but on idle temps seem fine, just leaving it to run for now before I game or do anything what so ever.

http://s1111.photobucket.com/user/Reaper85/media/78786656-2863-43b3-9137-1ac182766f32_zpshjmolbty.jpg.html][/URL]

http://s1111.photobucket.com/user/Reaper85/media/af8aae8b-2546-4d35-8ebf-6899a922579f_zpsnwcow6x3.jpg.html][/URL]

http://s1111.photobucket.com/user/Reaper85/media/806fd072-cc7f-4de4-ac4d-5b2aa3e3a16b_zpsarebnrcd.jpg.html][/URL]

http://s1111.photobucket.com/user/Reaper85/media/cd316714-3c45-464a-83ee-5aca2f12c908_zps8izdo8zr.jpg.html][/URL]

http://s1111.photobucket.com/user/Reaper85/media/IMG_1184_zpsdoujhp94.jpg.html][/URL]

http://s1111.photobucket.com/user/Reaper85/media/IMG_1185_zpsxfuvks10.jpg.html][/URL]

http://s1111.photobucket.com/user/Reaper85/media/IMG_1186_zpsqqwbtvm9.jpg.html][/URL]

My case does have a top fan at the end of the rear, so need to sort better air flow, 3rd fan I have is fixed to the bottom hdd caddy for hdd cooling.
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
Ha cheers, did something similar with the pizza box for my pi, tho that's just a pi in a box and 2 adapters, the project has halted at the minute, but gave me the idea for the tower as well as space saving..

I did that within couple minutes of the start of the topic ha, and the kids are in bed.

You know I didn't think too much of the psu heat, nothing was going on during the idling, I've turned it off for now for Xbox lol, but will resume in the morning, I only cut enough space to reach the ports, I could and will likely cut more space round the psu just in a rectangle shape like the other bits, so enough heat/air will get out, i don't think I could fit a fan to the actual box, not because of the thin weak cardboard, but I don't know of any flat usb powered fans?
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
Sorry, someone remind me......why??

Why I've done this or why to the other persons reply?


If it was aimed at me then I did it because I can, I like daft projects like this, the box was doing nothing other than holding my raspberry Pi and accessories in side while not being used which as you see is next to a radiator(switched off)that's under a window, it also supports small tubs of stuff I haven't sorted out yet on top, basically I have a single line of space in our room, I allowed the missus to have an L shape for her stuff and with needing to relocate my pc back upstairs I figured this was a logical and fun solution, we have cats and rather not have them climbing all over the tower or the kids touching it, plus it's not in the way either.

Only kept the box as it was useful, it's a cheap brand(shop brand) at a not so cheap price, so I'm not bothered about returning the case of care about the box, wouldn't do this with a branded box, I still have the box my pc with a different tower case came in, that's used for storage, won't hack that up, it would fit probably 10 flat ibm thincentres as a minimum to give an idea of box size.
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
How bizarre.

Not really if you think about it, I am in no position to actually build a computer in a box cardboard or wood and that would just seem a waste of a perfectly good case, only got the case about a month ago, I tend to keep boxes of certain stuff I buy, but rather than dump the box in the shed I have put it to use in a different way this time lol, I'm not going to take a picture of my bedroom, but I can't leave the computer there without being in the box and haven't got the unit space to stand it on, plus I was bored and thought it be amusing :D. I don't have a proper workstation anymore and couldn't keep using the dining table ha.
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
Ha sort of correct, the box was in my room anyways as I said it had my pi and bits for that project inside it and was using it as a stand for small tubs, my computer was setup up in the living room at my end of the dining table, but now it's in the way.

I only have that one side you see in the pictures for all my stuff and having cats that also like to climb in the window and chase each other around I don't want them touching the computer as there's higher chance than when it was downstairs, but also I have only that place to put the computer that would keep it out the way and so for the fun and sensible option I chose the box so then I would actually use it rather than store it away like it used to be.

It's a daft project to keep use of my computer and not risk cat hairs etc.
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
I will have to sadly fail the dare ha, I don't have any box big enough.

Not taken any pictures, but I've screwed 2 spare case fans I had to side of box, they molex powered ones, just need to cut the Center's out so they actual do their job lol then sort out connecting them.
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
Ha I actually thought of using my kids paints as colouring pens would dry out and take too long or get spray paint :D. This is a proper school arts & crafts or blue peter job ha ha
 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire








comedy hour ha, was surprised i didnt make the box too weak to hold them screwed in place, the blue one blows better than the red, but as far as im aware i have them to exhaust as i get confused sometimes ha and as they molex powered the blue is attached to the red and i took out the last expansion bracket to feed them through as thats obviously right above my psu where the rest of the unused cables are tied by.

















i put this picture in to show what the settings i have for this game and the fps count for being at 1920x1080, only ever played this game on pretty low res on low settings with a gts 450 1gb, so happy that my stock OC 1gb edition can get between 30-40 on high @ 1080p



this last pic is after i closed the game down, so id say this bizarre idea actually doesnt add much in the way of built heat up from the components and without taking a another picture i cut a rectangle out where the psu is for better breathing.

 
Soldato
OP
Joined
9 Jan 2016
Posts
3,727
Location
Derbyshire
The box project is now over after a very short life span lol, it was in the way of the window so that tv is going where ever as it's now a spare and my tower is currently out the box sitting on a unit other side of my tv, still got the box with the red fan in it(put blue in bottom of case), but it's only a temp thing as the computer might not be around much longer either
 
Back
Top Bottom