Aqua computer Octo help

[fantasticCG]

You mean the one that comes with the Octo?
It goes wherever you like, really.

People used to tape loads of these to hard drives and other components around the case, although system sensors are pretty good these days. I still have a couple threaded around inside my case with the sensor tips sticking out into open areas, mainly just to see what sort of temperatures the various spaces are.
They're not a requisite for Octo operation, though, as Aquasuite will read temperature values from your system and send any commands you set via the USB.

Cool thank you!

 

[fantasticCG]

Hi guys,

So installed a distribution plate into my pc.

Turned it all back on the aquasuite software/octo needed a firmware update so I did that, now in the software it doesn't recognise it.

I get this messages

http://imgur.com/gallery/rpjniuk

I uninstalled/reinstalled the software to this

http://imgur.com/gallery/9EtCuZZ

Windows sees the octo in device manager as working correctly.

I updated my bios as well.

I tested the 2 USB ports on the mobo with the rgb controller and they both work.

Fans and pump are running but i have no control over it now, not sure whats happened?

 

[redkrptonite]

Hi guys,

So installed a distribution plate into my pc.

Turned it all back on the aquasuite software/octo needed a firmware update so I did that, now in the software it doesn't recognise it.

I get this messages

http://imgur.com/gallery/rpjniuk

I uninstalled/reinstalled the software to this

http://imgur.com/gallery/9EtCuZZ

Windows sees the octo in device manager as working correctly.

I updated my bios as well.

I tested the 2 USB ports on the mobo with the rgb controller and they both work.

Fans and pump are running but i have no control over it now, not sure whats happened?

I don’t know if you’ve solved this but in case anyone else ever has this issue. I’m pretty certain you need to update the firmware on the octo itself for it be recognised again with the updated aquasuite. There should be a update setting inside the aquasuite software under the all the octo settings.