• Notice regarding image hosts and attachments. See here.

Askrock Conroe Wont Post

Associate
Joined
31 Dec 2006
Posts
74
Location
Gloucester
Afternoon all,

I've just installed a new motherboard into a system, and the thing wont post; no output to vga, not even a single beep coming out the speaker.

It was pretty much a straight swap out for another motherboard which developed a fault, so I know the CPU and RAM are fully operational up to about an hour ago.

The new motherboard in question is an 'Asrock ConRoe 1333-DVI/H'.

I'm using a Intel Pentium E2160 and 2x 2GB RAM. I've tried using one stick of RAM at a time, in all four slots, still no joy.

Any suggestions on what to try next?
 
I thought you meant post physically, rather than POST as you should have written it. Oh how funny! WRONG FORAM
 
Your processor has been supported since BIOS P1.10... it wouldn't surprise me if you have an older BIOS, perhaps the original BIOS rather than an updated one. In which case it needs updating before that CPU can be used in the motherboard.

To test this out, you'd need to get a processor from this list that has "ALL" written next to it:
http://www.asrock.com/mb/cpu.asp?Model=CONROE1333-DVI/H&s=

So maybe the motherboard has BIOS P1.00 and you need to update it to P1.10+?

Obviously this isn't a guarantee so don't go doing anything silly like buying a new CPU - your motherboard could already have a more up-to-date BIOS... but I had a similar problem and the BIOS turned out to be at fault.
 
Oi! No proper posts until the thread is moved!

:p To be fair, I wouldn't even have answered if this were posted in the motherboard forum... I only come to GD and HTML, sometimes PC Games and Graphics to see about the 9x00 series and what spandextastic graphics I'm missing out on :p
 
Back
Top Bottom