• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Asus 7970 Matrix Platinum weird issue

Soldato
Joined
27 Nov 2009
Posts
3,869
Location
Maidstone, Kent
Ok, so a little background. My PC was watercooled with a reference 7970. I have now sold all the watercooling bits off, and purchased a new 7970 (I wanted a capable cooler, but I wasn't a fan of the Alpenfohn Peter or Prolimatech Mk26). First I bought a Gigabyte Windforce - locked voltage, sent back. Then a 7970 Direct CU II - locked voltage AND green artifacting pixels at 2560x1600 on the DVI-D (none when run at 1280x800 in DVI single mode).

Now a 7970 Matrix Platinum, which doesn't output anything onto the monitors (in either BIOS switch position, or with any display output, not DP, DVI or VGA). So, I sent it back, to receive another with an identical issue. In the mean time, I've got a HIS 7970 Turbo GHz Edition (or something), which has 2x 8pin PCI-E and works without a problem.

So, neither Matrix Platinum works in my PC, yet when put into my brother's PC, it works fine, instantly.

My system specs are:
CPU: AMD FX8320 @ stock (playing it safe)
RAM: Patriot 8GB 1600MHz CAS9
Motherboard: MSI 990FX-GD65
PSU: Silverstone Strider 750W Gold
Displays: Dell 3007WFP-HC (DVI-D) & Dell 2001FP (DVI or VGA)

His system:
CPU: Intel i5 750 @ 3.8GHz
Motherboard: Asus Maximus III Gene
RAM: 8GB OCZ
PSU: Xigmatek Taurus 550W
GPU: GTX480 (normally)
Displays: Dell 2311H (DP, DVI, VGA - I tested both DVI and DP, and both worked fine)

All the other 7970s have worked fine in mine (well have at least showed a picture at POST and in Windows, even if weird), so I think I can rule my PSU out. I'm thinking it's the motherboard, but there's no setting that I can see which might change that. I've tried the 6 pin PCI-E port on the motherboard, in case the GPU isn't getting enough power, but that's not helped. The GPU lights up and everything, it's just like it never gets a display signal from the motherboard.

What have I missed?

TL;DR:
-7970s all work fine, neither Matrix Platinum has done - no display output
-Matrix Platinums work fine in brother's PC
-PSU not the issue, motherboard?
 
I changed motherboard, and all is well. Seems slightly weird. There were no extra BIOS available for the MSI, but now I have the UD3 like I originally planned anyway...
 
I changed motherboard, and all is well. Seems slightly weird. There were no extra BIOS available for the MSI, but now I have the UD3 like I originally planned anyway...

Hi Marvin :)

I have an x79 ud3/matrix platinum and cannot get a display signal from it 2560 x 1440 using a dl dvi, have scoured the sites and forums making sure I had it right with the bios switch etc and still nowt.
Card powers up fine 2 constant greens on the 2 x 8pin psu connections etc but nowt.
Got a displayport cable coming tomorrow but am not 100% confident that's going to work just trying to rule it out.

Do you have yours setup with a dl dvi cable now?

Cheers
 
Hi Marvin :)

I have an x79 ud3/matrix platinum and cannot get a display signal from it 2560 x 1440 using a dl dvi, have scoured the sites and forums making sure I had it right with the bios switch etc and still nowt.
Card powers up fine 2 constant greens on the 2 x 8pin psu connections etc but nowt.
Got a displayport cable coming tomorrow but am not 100% confident that's going to work just trying to rule it out.

Do you have yours setup with a dl dvi cable now?

Cheers

I had a similar problem with mine, I could not get it to run @1600p. In the end I put one of my GTX 690s in the system and set the resolution to 1600p and then replaced it with my matrix platinums, after which everything was fine.

The above solution is probably not very helpful to you but it may give a clue where to look. I don't think the problem is with the hardware, I think it may be software related.

I also use a DL DVI cable.
 
Thanks for the input kaapstad much appreciated :)

Yes am reasonably sure the hardware is ok as the chap I purchased it from had no issues its as you say probably software related. I even tried to go for a clean windows install but of course I couldn't get a display to do it hopefully the displayport cable I ordered should arrive in the morning and it will be ok .... well am hoping so anyways :(
 
Cable arrived same problem. I tried setting resolution restarting even tried hooking it up via a dvi/hdmi adapter to the tv no joy.
:confused::confused:
 
Same issue when I had it, DL-DVI cable on the Matrix Platinum just doesn't work on some boards. For reference, my motherboard is a 990FX-UD3, rather than X79, but pretty sure it's firmware related, since I reinstalled Windows to the same issues. I wonder if it does it in Linux.
 
Hi Marvin

Sorry about hijacking your thread but when I seen what I thought was the same problem thought I would add mine.
But good news its all working fine now. I had uninstalled all the NVidia stuff but for some reason the physics was still installed which I found trawling through the c drive manually. Uninstalled it and card booted fine straight after, so in a way I guess it was my own fault :o:o:)
 
Back
Top Bottom