Ok, so a little background. My PC was watercooled with a reference 7970. I have now sold all the watercooling bits off, and purchased a new 7970 (I wanted a capable cooler, but I wasn't a fan of the Alpenfohn Peter or Prolimatech Mk26). First I bought a Gigabyte Windforce - locked voltage, sent back. Then a 7970 Direct CU II - locked voltage AND green artifacting pixels at 2560x1600 on the DVI-D (none when run at 1280x800 in DVI single mode).
Now a 7970 Matrix Platinum, which doesn't output anything onto the monitors (in either BIOS switch position, or with any display output, not DP, DVI or VGA). So, I sent it back, to receive another with an identical issue. In the mean time, I've got a HIS 7970 Turbo GHz Edition (or something), which has 2x 8pin PCI-E and works without a problem.
So, neither Matrix Platinum works in my PC, yet when put into my brother's PC, it works fine, instantly.
My system specs are:
CPU: AMD FX8320 @ stock (playing it safe)
RAM: Patriot 8GB 1600MHz CAS9
Motherboard: MSI 990FX-GD65
PSU: Silverstone Strider 750W Gold
Displays: Dell 3007WFP-HC (DVI-D) & Dell 2001FP (DVI or VGA)
His system:
CPU: Intel i5 750 @ 3.8GHz
Motherboard: Asus Maximus III Gene
RAM: 8GB OCZ
PSU: Xigmatek Taurus 550W
GPU: GTX480 (normally)
Displays: Dell 2311H (DP, DVI, VGA - I tested both DVI and DP, and both worked fine)
All the other 7970s have worked fine in mine (well have at least showed a picture at POST and in Windows, even if weird), so I think I can rule my PSU out. I'm thinking it's the motherboard, but there's no setting that I can see which might change that. I've tried the 6 pin PCI-E port on the motherboard, in case the GPU isn't getting enough power, but that's not helped. The GPU lights up and everything, it's just like it never gets a display signal from the motherboard.
What have I missed?
TL;DR:
-7970s all work fine, neither Matrix Platinum has done - no display output
-Matrix Platinums work fine in brother's PC
-PSU not the issue, motherboard?
Now a 7970 Matrix Platinum, which doesn't output anything onto the monitors (in either BIOS switch position, or with any display output, not DP, DVI or VGA). So, I sent it back, to receive another with an identical issue. In the mean time, I've got a HIS 7970 Turbo GHz Edition (or something), which has 2x 8pin PCI-E and works without a problem.
So, neither Matrix Platinum works in my PC, yet when put into my brother's PC, it works fine, instantly.
My system specs are:
CPU: AMD FX8320 @ stock (playing it safe)
RAM: Patriot 8GB 1600MHz CAS9
Motherboard: MSI 990FX-GD65
PSU: Silverstone Strider 750W Gold
Displays: Dell 3007WFP-HC (DVI-D) & Dell 2001FP (DVI or VGA)
His system:
CPU: Intel i5 750 @ 3.8GHz
Motherboard: Asus Maximus III Gene
RAM: 8GB OCZ
PSU: Xigmatek Taurus 550W
GPU: GTX480 (normally)
Displays: Dell 2311H (DP, DVI, VGA - I tested both DVI and DP, and both worked fine)
All the other 7970s have worked fine in mine (well have at least showed a picture at POST and in Windows, even if weird), so I think I can rule my PSU out. I'm thinking it's the motherboard, but there's no setting that I can see which might change that. I've tried the 6 pin PCI-E port on the motherboard, in case the GPU isn't getting enough power, but that's not helped. The GPU lights up and everything, it's just like it never gets a display signal from the motherboard.
What have I missed?
TL;DR:
-7970s all work fine, neither Matrix Platinum has done - no display output
-Matrix Platinums work fine in brother's PC
-PSU not the issue, motherboard?



