• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

ATI Overdrive auto tune.

Associate
Joined
24 Jan 2010
Posts
126
was thinking of oc my gpu alittle 5850, and was told that auto tune would be a safe overclock. Just a fue questions, how long will auto tune take? and will I have to change fan speed to keep card cool? thanks....
 
I've only used it for my 3870, but it usually takes about 10 minutes on there. However, I have had problems when playing MW2 where the gpu decides it doesn't wanna respond anymore so settings are automatically returned to stock anyways.

Anyone else had this problem?
 
5850s clock pretty well. Tried my Asus today with the auto tune and it got up to 825 core, then i got bored so I went in at 850 core, stock memory, and it was fine. Then upped the memory by 50Mhz increments up to 1150. Furmark maxed temp out at 77degC @33% fan. All this on stock volts hehe.

If you dont have an MSI or asus card, your bios will be locked to a max of 775 core (not sure on memory), someone correct me if im wrong. You can do it all manually instead of auto tune using the test custom clocks, just take slightly bigger jumps than the 5Mhz auto tune does.

ps, the fan is set to auto by default, so ramps up more to keep the card cool at higher clocks.
 
Last edited:
Have used autotune only a few times and when i have it seems to have taken ages to reach its limit then when playing a game with the overclock it has set it starts to artifact so have had to drop it back down again ( stick to manual )
 
Last time I used autotune it clocked my card way higher than was "safe", it was artifacts city yet the autotune seemed to think it was ok?
 
Autotune is useless, as it always takes a long time and overclocks way beyond "safe" levels. And the 5xxx series is a lot more sensitive when it comes to drivers and overclocking, so I'd be even less inclined to put any faith in it.
 
Autotune is useless, as it always takes a long time and overclocks way beyond "safe" levels. And the 5xxx series is a lot more sensitive when it comes to drivers and overclocking, so I'd be even less inclined to put any faith in it.

+1. No joy using autotune. Take ages as well.
 
Do it manually using RivaTuner. Increase mem speed slowly until you start getting artifacts when benching, then go down a little like 30 MHz to stay safe, after that start increasing core until you either don't want to go any higher, or your temps are out of the comfortable zone, or you get artifacts. After that stress the system for a few hours at least to make sure you don't get any artifacts still and the temps are okay, if not turn down the core a bit.
 
Back
Top Bottom