• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

atix1950 help :(

Associate
Joined
24 Feb 2009
Posts
6
hi im josh had my pc over 2 years and probably about 6 months in i kept getting a problem when playing games anyway heres my setup:

CPU : Intel e6600 2.4 running at 3.6ghz
Motherboard: Asus P5B deluxe wifi edition
Graphics Card: ATI Gecube X1950pro 512mb
PSU: Hiper modular type r 580 watts
Ram: 2 x 1gb super talent ddr2

my pc is stable ran 6 hours of prime an hour of occt not a problem also run tests on the gpu nothing.

what happens is ill be playing a game and after about 1-10mins of gameplay the game would suddenly lock up and the sound would loop this would continue for a few secs then the screen goes blank try and ctrl alt delete but after pressing them the keyboard locks up (num lock caps lock and scroll lock lights stuck on or off) the only way to get it back is to reset the system.

the only way i can play a game is to put the bios back to defualt, i have tried lowering the fsb and multiplier even to 3ghz but still no luck the bios has to be default. even the game actually runs smoother at 2.4ghz than 3.6ghz surely thats not possible :S
on another forum they said my 12v was running to high it was at 12.88 but what i cant understand how even if it is at 12.88 why the games do work at defualt bios settings. i have tried loosening the ram timings, changing drivers, reinstalling windows, had my house fan blow freezing air from outside onto it but nothing works. any ideas?

(sorry about the long post)

thanks jtg
 
Firstly, you're claimed by me (got one eventually):p
Now, it seems to me you're overclock isn't stable. What cpu Vcore, Vdimm, are running with? What are your load temps like? If the system runs fine at stock then its obvious that its the overclock causing the prob:)
If your memory is DDR2 800 (pc6400), then try running the cpu at 400 x 8, that'll give you 3.2ghz which is about all you really need nowadays, take the vcore up to around 1.4v and try orthos to check for stability. Ensure your memory is set at 1:1 (if its actually DDR400) and set the vdimm 2.1v, raise the mch (northbridge) and FSB voltages by one increment, (about +0.1v I would think), set the pci bus to auto (if it still fauils then try setting this to 100mhz) . Try that and keep an eye on the temps and post back.
 
Last edited:
It could be that Hiper, see if you can try another PSU from a friend.

At stock all could be well but the overclock could be pushing it too hard,

These were reported to have a high failure rates.

Also you could try a lower overclock, maybe 3.0 to see how it is.
 
thanks for the replies my vcore is at 1.4875 this is the lowest voltage i can run prime at for 6 hours or more, vdimm is at 2.15
my ram specs are this http://www.supertalent.com/datasheets/T800UX2GC4_spec.pdf
ddr2 800 pc2 6400
i have tried messing with voltages for a few days no matter what happens still nothing changes actualy maxed out the voltages on pretty much everything with cold air blowing on it to make sure heat stays down

ill try 400 x 8 (its on 400 x 9 at the moment) see what happens and also seeting the pci bus to auto at the moment its on 100

ill let you know what happens thanks again
 
Last edited:
okay well gave it a go still the game stutters :( not sure if memory set 1:1 how do i check this?
my ram timings where 4-4-4-12 but loosened them in case to 5-5-5-15 but still no luck :(
 
Raise the vcore up 1/2 notches in bios regardless whether your system can pass prime, then make sure you ram is running at or below 800Mhz, lastly what sort of temperatures are you getting. From what you describe above your CPU hasn't got enough voltage.

Also set the PCIe frequency to 101 in the bios and notch the NB/MCH up 1/2 in the bios. What your current MCH/NB voltage?
 
okay well gave it a go still the game stutters :( not sure if memory set 1:1 how do i check this?
my ram timings where 4-4-4-12 but loosened them in case to 5-5-5-15 but still no luck :(


If you set 400 fsb for the cpu, and in the memory divider option use either 1:1 or x2 setting in the bios (depends how it shows up in the bios), this'll set your ram speed to 400mhz, ie: stock
 
Happy: okay uped the vcore to 1.5v and set the pcie freq to 101 and still no luck crashed within 30 secs of playing. my ram is set to 800mhz. the temps at idle are around 28-30c and under load max at about 55c

my fsb nb sb and ich are all auto i already tried ajusting the voltages of them with no luck.

i thought id post my bios set up to see whether you can see anything once again thanks for helping.

MAIN:
legacy diskette - 1.44m 3.5inch
language - english
Sata 1 - st3250620as
sata 2 - tsstcorpcd/dvd

IDE CONFIG:
sata config - enhanced
configure sata - ide
hard disk write protect - disabled
IDE detect time - 35

JUMPER FREE:
AI - manual
cpu freq - 400
DRAM freq - DDR2 - 800mhz
PCI express freq - 100
PCi clock sync mode - 33.33mhz
spraed spectrum - disabled
memory voltage - 2.15v
CPU vcore voltage - 1.4875
fsb - auto
nb - auto
sb - auto
ich - auto

LAN CABLE STATUS
post check lan cable- disable

USB CONFIG:
usb function - enabled
usb wifi/usb 9,10 - enabled
legacy usb dupport - auto
port 64/60 emu - disabled
usb 2.0 controller mode - high speed
BIOS EHCI hand-off - enabled

CPU CONFIG:
modify ratio support - enabled
Ratio - 9
CIE - disabled
Max Cpuid value limit - disabled
vanderpool tech - enabled
CPU tm function - disabled
Execute disable bit - enabled
PECI - disabled

CHIPSET NORTH BRIDGE:
memory remap feature - disabled
config DRAM timing to SPD - Disabled
DRam cas# latency - 4
Dram ras# to cas# - 4
Dram ras# precharge - 4
Dram ras# activate to precharge - 8
dram write recovery time - 6
dram trfc - 42
dram TRRD - 10
ram read to write delay - 10
read to precharge delay - 10
write to precharge delay - 10
static read control - auto

initiate graphics adaptor - peg/pci

Peg force x1 - disabled
peg lim mode - auto
asus cgi - auto

SOUTHBRIDGE:
pciex16_2/PCIex1_1 force - auto

ONBOARD DEVICES CONFIG:
HD audio controller - enabled
front panel support type - hd audio
onboard 1394 controller - enabled
onboard pcie GBE lan_1 - enabled
lan option rom - disabled
onboard pci LAN_2 - enabled
lan option rom - disabled
jmicron sata/pata controller - enabled
jmicron controller mode - ide

serial port address - 3f8/irq4

PCI/PNP:
Plug and play o/s - no
pci latency timer - 64
allocate IRQ to PCI - yes
All IRQ assigned to PCI Device

POWER:
suspend mode - s1 (pos) only
ACPI 2.0 - Disabled
ACPI APIC support - Enabled

APM CONFIG:
restartr on ac pwer loss - power off
power on by all diabeld:
rtc alarm
external modem
pci devised
ps/2 mouse
ps/2 keyboard

BOOT DEVICE
1st boot - hdd
2nd - cdrom
3rd - floppy

BOOT SETTINGS
quick boot -enabled
full screen logo - disabled
add on rom display mode - force bios
bootup num lock - on
ps/2 mouse support - auto
wait for f1 if error - enabled
wait dcl message display - enabled
interup 19 capture - disabled
 
Last edited:
Well according to those settings your still running an overclock that I doubt is stable, ie 400x9 =3.6GHZ at only 1.48v and 800Mhz ram at 4-4-4-8. So I would change:-

* PCIe Frequency to 101 (most people leave it on that regardless)
* Your still running your 3.6GHz overclock, try 9x266 for 3GHz
* Your ram timings are far too tight. Leave them on auto or set to 5-5-5-15 and the rest on auto.
 
Last edited:
turns out its nothing to do with the overclock just play eurotruck simulator and the game crashes even with all bios settings default anyone got any ideas?
thanks jtg
 
Back
Top Bottom