AUNE T1 (MK1 + MK2) discussion

Wait until you use it with some tracks from a decent source then, that haven't had the bitrate spanked by YouTube :p

I use MusicBee with it's built in WASAPI mode for bit perfect sound - it keeps the signal away from Windows' insatiable appetite for resampling everything. :D

yeah - i will be doing that in future. it's the first day and i'm just playing with it atm.

now the clipping has disappeared it sounds fantastiche (bellismo).

need to go out and cut the hedge as quickly as possible so i can come back in and play with this some more lol, also contemplating getting some HD600's
 
Yeah, whoever was behind dropping the price on those has a lot to answer for - they were safely out of range for me at £300 but now they have my wallet in a panic :D
 
I use MusicBee with it's built in WASAPI mode for bit perfect sound - it keeps the signal away from Windows' insatiable appetite for resampling everything. :D

Foobar also bypasses Windows need to ruin everything, and also features that oh so lovely DSP manager. I've never tried MusicBee, and now that Ive finally got Foobar set up how I want it (only taken a year! :D) Imnot sure I can bothered to move!
 
I'll be ordering HD 600's tonight. Holiday got cancelled as I have been given an opportunity of a lifetime so I cancelled my ticket and dropped the wife off at the airport on Monday to go on her own.

So all the spending money I've been saving up is bursting my wallet lol.

I wasn't going to get the aune t1 but I just went for it. Flubit came back with £201 on HD 600
 
HD600's ordered.

The power supply is still humming but when I put my Fidelio X1's on (with nothing playing) it dampens out the hum that's why I couldn't hear it before. I can hear the hum from 10 feet away without any headphones on. It's not loud but it is annoying. Not loud enough to head with headphones open headphones on so it's fine but was wondering if that was normal.

A lot of people though cannot hear this buzzing. I used to be able to hear it on my old LED backlighting for my plasma and it was annoying but I swapped them out for USB version and now cannot hear any hum from the new ones.

A lot of people also cannot hear plasma hum but I can.

Anyway time to expirment some more.

https://www.dropbox.com/s/oizzthyw2kfmo7g/2014-06-20 11.31.02.jpg

https://www.dropbox.com/s/9gm3cypxfd00owx/2014-06-20 11.31.26.jpg

https://www.dropbox.com/s/r69t93z2394g3v4/2014-06-20 11.31.43.jpg

https://www.dropbox.com/s/mefyhrbeftp0rv8/2014-06-20 11.33.20.jpg

https://www.dropbox.com/s/eteca6ot4erpxxc/2014-06-20 11.33.27.jpg

https://www.dropbox.com/s/qi2szjrxe03beq4/2014-06-20 11.57.09.jpg
 
HD600, why?

Well all my other headphones are mid-fi. HD600 are audiophile level. I wanted to see what all the fuss was about and the difference between mid-fi and hi-fi.

They are also currently on offer at the cheapest price they have been in 4 years.

If I don't like them I can most likely sell them for a profit in 6 months time.
 
Meh, even with the price drop they aren't what I'd go for at £200 :p Not really a fan of their sound signature, but this is of course subjective! :D
 
I see, can you compare them to the X1s for music, gaming and movies? cheers.

"The HD600 has long been one of the best values in the headphone market. It represents one of those rare instances where the performance level is so high for the price that one may feel compelled to use it as the gold standard in terms of value; I certainly do. When I grade all other headphones' price-to-performance ratios, I consider the HD600 and how close it gets to perfection for around 400 dollars.

The HD600 is an evolution of the HD580, which debuted nearly 20 years ago. The HD600 has been in production for well over a decade and it has remained among the most recommendable headphones at its price for its entire production run. It may not compete with extreme-high-end models for the title of "best headphone"; It may not exhibit the transparency-level nor clarity-level of high-end Stax models; it may not be as emotive sounding as the R10s; it may not offer the impressive soundstage capabilities of the K1000, SR-Sigma, HD800 and T1; it may not offer quite the impact of the flagship orthodynamic models by Audez'e and HifiMan - but in its class, I know of no other headphone that is deserving of more acclaim.


STRENGTHS
EXCELLENT TONE: I adore the tone of the HD600. The bass, mids and treble are beautifully integrated. The tone is very close to neutral, featuring a pinch of extra warmth and body.

MIDS: The HD600 has a slightly forward midrange that adds weight to vocals. There are no odd peaks or dips here. Simply put, the HD600 possesses a very natural midrange.

GENRE MASTER: The HD600 is ready to serve its listener. Whether you like pop, classical, rock, hip hop, r&b, jazz, funk, blues, country, electronic, dance, world, etc. it will be a worthy purchase for you.

TRANSPARENT: While the HD600 lacks the speed and agility of electrostatic headphones, and although the HD600 doesn't offer quite the depth of several top-flight dynamic headphones, the HD600 is still a highly transparent headphone.

BASS: Some people will ultimately prefer the bass response of the HD600 to its younger sibling, the HD650. The HD600 has a leaner, yet more neutral bass response when compared with the HD650. The two headphones are largely similar, but it is in the bass presentation as well as the lower-mids where the two Sennheiser models reveal their most obvious differences.

NOT TOO AMP PICKY: With a nominal impedance rating of 300 ohms, the HD600 really does benefit from amplification. However, I have found that this headphone is not particularly amp picky. It sounds fantastic When paired with most of the amps with which I've used it. Furthermore, it sounds particularly good when connected in balanced mode.

COMFORT: The oval-shaped earpads are made of generously plush velour material. This helps make the HD600 a very comfortable headphone to wear. I prefer an oval shape to a round shape because an oval is more form-fitted to the human ear. I have used the HD600 for several hours without break. I have not a single complaint with regard to its comfort-level.

EASILY REMOVABLE PARTS: Many of the parts used in the HD600's construction, including the earpads, cable and grills are user replaceable. Parts are still easily obtainable from Sennheiser. This ensures that your headphone can look and function as new for a very long time.


WEAKNESSES
LACKS DETAIL: The HD600 has a very smooth sound that can sometimes feel slow and slightly blurred. The HD600 is not the last word in terms of detail retrieval.

TREBLE: For as long as I've been a member of the Head-Fi community, the HD600 and HD650 have been criticized by some for having what many refer to as a veiled sound; a sound lacking in both air and harmonic content. I can understand this criticism. Conversely, the HD800 has been criticized for having the treble tilted too far forward. I don't agree with this criticism as the HD800 changes drastically from amp to amp (it can sound quite warm in some setups). The HD600's sonic presentation ultimately lacks some upper harmonics regardless of with which amp it is paired. The good news is, the treble is almost complete void of grain and is not at all harsh or sibilant.


ON THE FENCE
SOUNDSTAGE: The HD600 has an open sound, yet its soundstage is not particularly wide. In my opinion, the soundstage presentation here is best suited for smaller ensembles. In particular, I really enjoy the way jazz music sounds with the HD600. But realistically, just about everything sounds good with the HD600.

IMAGING: The HD600 has the ability to image decently. However, it does not quite offer the pinpoint accuracy which some higher-end headphones are capable of offering.

DECAY: The HD600's decay is slightly slow, but at the same time is very smooth and natural. This makes for a rather engaging (and somewhat romantic) sonic experience.

CABLE: The quality of the HD600's stock cable is not too bad considering the price of the headphone. However, Sennheiser makes the cable easily removable. This makes it very easy to install an aftermarket cable replacement. I use the Moon Audio Silver Dragon when in balanced mode. I think the HD600 scales nicely in balanced mode. In the picture shown above, the HD600 is photographed with the HD650's stock cable.


FOR THE PRICE
A+
The HD600 is one of only five headphones that I have awarded an A+ value rating in this entire evaluation (the other four are Beyerdynamic's DT 880, Audio-Technica's ATH-AD900, and HifiMan's HE-400 & HE-500). Dollar for dollar, the HD600 is among the best sounding headphones I have ever heard. Therefore, I feel it deserves a place in every serious headphone collection.


QUICK CHECK
DESIGN: Full-Size
DRIVERS: Dynamic
IMPEDANCE: 300 Ohms
ISOLATION: Little to None
AMPLIFICATION: Highly Recommended
MY PREFERRED AMP: TTVJ Millett 307A / SPL Phonitor
SOUNDS BEST WITH: Everything & Anything
CABLES USED: Moon Audio Silver Dragon Balanced / Stock
REVISIONS KNOWN: None known to me
FLAGSHIP STATUS: Once Was
PRODUCTION STATUS AS OF 2012: In Production
COST: $399.95 (without aftermarket cable) $699.95 (with aftermarket cable)"

http://www.head-fi.org/t/634201/bat...ompared-update-audeze-lcd-2-revision-2-6-4-13

That compares 58 hi-fi headphones and these come in the top 5 from their perspective


Meh, even with the price drop they aren't what I'd go for at £200 :p Not really a fan of their sound signature, but this is of course subjective! :D

I'm a bit of a sennheiser fanboy tbh.

I have 558's for console gaming and HD25-1 II's for portable use this completes the set.
 
HD25-1 II's I simply cannot fault for the money, one of the best portable cans imo!

Do you know anything about "Custom cans Sennheiser HD25 Mass loading and damping kit bass and detail mod"?

If you google that you can see it's fairly easy to do part one of the mod and it only costs £8. Part 2 of the mod is risky and harder (I may leave that part out as damaging the driver would leave me in tears).

Do you think it's worth doing? I have been meaning to buy the kit but never done it for some reason.
 
Never heard of it, will give it a Google now.

I'm ashamed to admit I've just ordered AKG Q701's now as well because they were only £95 (before duty).

Heard great things about them when it comes to gaming. I will require to double amp them though as my mixamp cannot drive them sufficiently on their own.

I hope my topping NX1 does that without any issue.

That's me done. I'm not buying anything else. I need to find sufficient hiding places to hide all these headphones before the wife gets back.
 
I hope my topping NX1 does that without any issue.

Well I have been testing my setup with and without the NX1 and to be perfectly honest, I think it is degrading the audio a little. It is one of the reasons I bought the Arcam rPAC as it amps as well as being a DAC. I've only really noticed it at high volumes though.
 
Well I have been testing my setup with and without the NX1 and to be perfectly honest, I think it is degrading the audio a little. It is one of the reasons I bought the Arcam rPAC as it amps as well as being a DAC. I've only really noticed it at high volumes though.

meh I paid £20 for it and I noticed a hiss when there is no signal from the line out on my ipod touch as soon as you push a signal the hiss disappears.

head fi reviews have all been really good.

it's a £20 portable amp you cannot really expect it to compete with a Arcam rPac which retails for what £150?

when you break down the fact that £20 includes shipping, packaging, a usb cable, a battery, bands, velcro, solid metal case, etc it's pretty amazing for the price.

you are right though after listening to the aune t1 mk2 today it's certainly not brilliant but it does the job.
 
Started getting clipping again when using musicbee and wasapi and a flac file.

Youtube was fine. Something weird is going on. The Brick stops humming after it has warmed up.

Could it be the brick is faulty? Something isn't right it shouldn't be clipping.
 
If you can hear the brick above all your fans I'd say it's faulty, as I said, I have to literally press my ear against mine to hear anything and it never gets louder than that.
 
If you can hear the brick above all your fans I'd say it's faulty, as I said, I have to literally press my ear against mine to hear anything and it never gets louder than that.

Well I had been using the tube Mike sent me and I have switched out tubes now. I noticed there is more stuff lighting up inside the tube with the stock tube. Before I only had 2 red glowing bits now I have several.

I also noticed zero clipping on the first flac file i just played.

So far the finger is pointing at the tube. But who knows the other tube worked fine on some stuff too. If this one exhibits issues then I know it's the power brick. If it doesn't then it's the tube.


edit:

i also snapped one of those stupid protector things switching tubes out - they are very very fragile

edit 2:

clipping on the stock tube now as well - its something else

edit 3:

switched from USB 3.0 to USB 2.0 and it seems to be working now, will need more time with it and more testing. stock tube also sounds very very different. it's very neutral, no longer feels alive. i obviously need more time with it though
 
Last edited:
I don't understand how so many people manage to break the protectors, they just dropped into mine with zero pressure.

Does the clipping coincide with the transformer buzz or is it all random?
 
Back
Top Bottom