Average E6300 voltage?

BEn_2600+ · 25 Apr 2007 at 18:32

Im back down to 3.2GHz 3.3 wasn't fully stable (Think NB is overheating) My temps are 31oC idle and 44oC load havent tested for 100% stability yet tho but ill run orthos for 12hrs tonight and find out

phi1 · 25 Apr 2007 at 18:48

well that looks hopefull for me.. I was messing about with the program that came with the mobo and i got it upto 3.1ghz in the program.. Then i stopped...

Not bios...

Phil

Dravic · 25 Apr 2007 at 18:54

Mine needed 1.39v to get it stable at 3.4Ghz. Shows as 1.344 in CPUZ though.

phi1 · 25 Apr 2007 at 18:57

1.39 is not bad? Usally 1.35?

Whats the temps?

BEn_2600+ · 25 Apr 2007 at 19:56

Gonna try for 3.3 again in a min

Ill let you know if i can get it stable

EDIT: Changed my mind ill have a go tommorow, going to have a go on BF2142, if that dosen crash it nothing will :rolleyes:

EA for you.

BEn_2600+ · 26 Apr 2007 at 17:44

Think ive got it stable at 3.3ghz Memtest passed 3 times fine and im currently 30mins into orthos with no errors

gurusan · 26 Apr 2007 at 18:22

I've got my e6300 @ 1.425v ....not the best stepping...but I also haven't played with it much as I'm too busy with uni and CBA to futz with the puter as much as I'd like. I'm sure I can push it more.

scooby555t · 26 Apr 2007 at 18:34

RaiderX said:
1.156 is below stock, how are you getting that high?

i'm now at 2.000 set in Bios

i'm using OCZ Sli ram with a gigabyte DS3P mobo rev 3.3
i'll get a screenshot in a min

BEn_2600+ · 26 Apr 2007 at 18:40

scooby555t said:
i'm now at 2.000 set in Bios

i'm using OCZ Sli ram with a gigabyte DS3P mobo rev 3.3
i'll get a screenshot in a min

Honestly! Really DO NOT reccomend that your chip will fry in no time! :eek:

Get it down to 1.45 or upto 1.5 MAX!

RaiderX · 26 Apr 2007 at 18:54

im supprized it didnt cook the second u put it under load :eek:

wellibob · 26 Apr 2007 at 19:21

I run my 6300 at 1.3625, as by lowering the volts to stock levels gives me slighty higher temps at idle ???? Sits about 42 at idle , but the freezer 7 fan is just about turning. Full load it can hit the high 50`s , but is rock solid.

A m8 has a newer ds3 and 6300 chip, and his runs 15 degrees lower than mine(at least)

scooby555t · 26 Apr 2007 at 19:50

RaiderX said:
im supprized it didnt cook the second u put it under load

oops wrong voltage posted its 1.152

BEn_2600+ · 26 Apr 2007 at 19:56

Cpu-z always reports wrong voltage tbh what did you set in BIOS?

scooby555t · 26 Apr 2007 at 19:57

BEn_2600+ said:
Cpu-z always reports wrong voltage tbh what did you set in BIOS?

Bios is set to 1.200 volts

i'll try and get a photo of my bios settings

phi1 · 26 Apr 2007 at 19:58

I am gonna shove xp on.. to see if my temps are good.. wanna test TAT out..

BEn_2600+ · 26 Apr 2007 at 19:59

yeah 1.2 is fine below stock voltage

you must have a great chip! Do you know what Week Chip you have?

scooby555t · 26 Apr 2007 at 20:05

BEn_2600+ said:
yeah 1.2 is fine below stock voltage you must have a great chip! Do you know what Week Chip you have?

how do i tell that lol i got it a few months ago from ocuk

give us ** 2142 solder name and i'll add u to my hitlist lol

phi1 · 26 Apr 2007 at 20:34

wow he is mental!

I am installing xp now.. On my rig, Can you list some tools i want so far i have

Speedfan,
TAT

any others?

Ben i added you on msn..

scooby555t · 26 Apr 2007 at 20:36

cpu z
and coretemp if u want it works much like tat but doesn't stress ** cpu it just moniters

phi1 · 26 Apr 2007 at 20:38

Thanks, I have given up with vista the benifits i can see and like,

Icons
Skin/theme
sounds

Other than that it seems to add about 20 secs on boot time most things don't work with it and lots off other stuff, I will dual boot when my extra hardrives come. For now xp shall do..