B1H FI light

Ish · 17 Nov 2014 at 08:20

Hi

My bike was fine a week ago and it's been parked up since then outside with a cover on.

This morning when I strated it up the FI light came on and stayed on all the time but the bike seems to be running fine.

Any ideas?

It's a 2003 Kawasaki ZX6R 636 B1H.

Yaayuh! · 17 Nov 2014 at 08:59

If it runs fine, chance are it's a sensor.
This may be of use: http://zx6r.com/guides/12417-how-pull-fi-codes.html

wazza300 · 17 Nov 2014 at 11:46

check the exhaust valve servo

take off the panel behind the riders seat then turn the key on,it should twitch clockwise then anti clockwise,if it doesn't its that that's gone,it went on my bike and fI light stayed on

(it should also twitch when you turn off the ignition)

Ish · 17 Nov 2014 at 13:30

Thanks.

I've got the instructions now on how to read the fault code so will give it a try.

My model didn't have the servo valve.

wazza300 · 17 Nov 2014 at 13:35

you sure? code 34 and 63 on the guide rossi posted

Ish · 19 Nov 2014 at 08:42

The guide includes 05/06 bikes which did have the valve.

My code is 12 which is air pressure sensor so will lift the tank and have a proper look at the weekend.

wazza300 · 19 Nov 2014 at 11:10

I think Its the pointy plastic bit with two wires,it plugs into the airbox under the tank

only guessing though