-
Notice regarding image hosts and attachments. See here.
Bathroom extractor fan
- Thread starter MrBlobby
- Start date
While not technically pc related....
Pretty sure it's clipped at 4 locations. If you look at the exploded image you can see 'tabs' on the rear at the top and the bottom.
Not sure why you want to take it apart though... it doesn't seem to have anything you can change settings wise.
Pretty sure it's clipped at 4 locations. If you look at the exploded image you can see 'tabs' on the rear at the top and the bottom.
Not sure why you want to take it apart though... it doesn't seem to have anything you can change settings wise.
Fan speed selection is under the cover , humidity / timer
Deleted User 298457
Deleted User 298457
Look all the way around and there'll be a slot for a small flat head.
Soldato
- Joined
- 13 Sep 2003
- Posts
- 8,657
- Location
- Glocestershire
Why on earth would anyone want a red extractor fan?
It wasLuckily it’s not in the pc section then
Yeah well, it's for the Changing Rooms lot ! I've got a white one
It is clipped in four locations but as it's up against the ceiling I don't see how I can unclip them so to speak. An electrician put it in as the previous one had to be dewired.
Actually looking at it again might only be 'clipped' at the top... stick something thin under the bottom side and lever out gently (think tool like removing phone screen)... it might pop out.
Thanks yeah I bent round a bit of a credit card plastic.
Thanks a lot for posting this. I was finding it impossible to open the unit. The bent credit card did the trick - I slid it under the cover in the bottom middle (near the dip that is supposed to be pressed to open - decorative let’s say) and then slid left and right to disengage the 2 other clips at the bottom while pulling. Once all 3 were disengaged it opened.
Soldato
- Joined
- 14 Nov 2002
- Posts
- 7,856
- Location
- Under the Hill
there is a little slot where you insert a screwdriver and wiggle. It is fiddly in my experience.