Be* using your own adsl gateway?

z0mbi3

z0mbi3

z0mbi3

Soldato
Joined
9 May 2005
Posts
7,400
Location
Berkshire
Today is my live day and I'd like to see what speed I get with my USR9106 before I try the be box. It's ADSL2+ enabled so I should be good to go.

Any one know what settings I need to put in?

Also while I'm on about the be box, what's it like in terms of NAT?

Cheers
 
Nothing in paticular. It's jsut that I've got all my IP's setup on my USR and I'd rather try that out first.

edit: Actually, MrLOL, could you check your starter pack out for me and see if they have the manual settings in there (vpi/vci etc)?
 
Last edited:
well use that

the Be box is a speedtouch 780 with some be stuff thrown in, and the settings already configured

it will work just like your existing router so you can either use your USR if you want, or use the be. For static IPs/ DMZ etc.. it works exactly the same.
 
z0mbi3 said:
Any one know what settings I need to put in?
Click to expand...

ADSL settings
Multiplexing Method LLC Based
VPI 0
VCI 101
Basis settings: Does your connection require a login: choose No
Get IP Dynamically: Yes
Get DNS automatically: yes
NAT: Enable
and at the bottom of the page
Check Use this MAC address and put in the BeBox MAC address click apply and it will connect.
 
You must log in or register to reply here.
Back
Top Bottom