big graphics issue(beer in it for whoever can help)

no, that shouldnt effect it, uninstall again using windows add/remove programs, then bot into safe mode and run your driver sweeper again. reboot and reinstall CCC 9.4, maybe this is the issue, if not then use CCC to check bios version and flash if necessary
 
it wied how i cant find my CCC..

but in

C :drive/ATI/Support/9.4_vista 64_win7_64/driver/packages/Apps/CCC

I have a loads of files that seem to relate to CCC:confused: like:

Branding
core-implementation
core-preinstall
core-static
graphics full existing

ect ect

would i be able to find CCC there maybe or something there which could help????

or should i just uninstall 9.4..again then use driver cleaner pro to delte al the ATI related files then reinstall..again and maybe it be better????

4th time lucky or something,

hopefully you can help
 
Cut your losses and reinstall windows. Sounds like driver issues or data corruption, if the problem is reproducible after a reinstall then you get to go with diagnosing hardware
 
^^ no way...

i not going to reinstall windos just because 1 game doesnt seem to work properly.and having to reinstall every programme again a real bitch..along with all the drivers and devices..

i 100% sure it 100% games fualt, somone told me also that DOW2 another relic game had simular issues with loading crashes ect and relic didnt fix that untill a good while after release.

i think relic has very poor forum tech support yet they really the only ones who could help in telling you if it the game issue or not, typically they tend not to tell you anything about game being wrong for covering themselfs..... sad really.


i did a windos dias heres the result what you recon any thing sticking out then.

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\Mini042009-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
************************************************** **************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
************************************************** **************************
Executable search path is:
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Machine Name:
Kernel base = 0xfffff800`02215000 PsLoadedModuleList = 0xfffff800`023dadb0
Debug session time: Mon Apr 20 01:59:58.216 2009 (GMT+1)
System Uptime: 0 days 8:45:22.070
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
.................................................. .............
.................................................. ..............
.......
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
Unable to load image watchdog.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for watchdog.sys
*** ERROR: Module load completed but symbols could not be loaded for watchdog.sys
************************************************** *****************************
* *
* Bugcheck Analysis *
* *
************************************************** *****************************

Use !analyze -v to get detailed debugging information.

BugCheck 117, {fffffa8007c494e0, fffffa6002221574, 0, 0}

*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.

************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Probably caused by : atikmdag.sys ( atikmdag+12574 )

Followup: MachineOwner
---------
 
Back
Top Bottom