Bios and task manager?.

skipper847

skipper847

skipper847

Associate
Joined
10 Feb 2011
Posts
1,566
Hi I have not messed about with this PC in terms of bios update or messed around with bios settings.

My Ram

My basket at Overclockers UK:
Total: £148.69 (includes shipping: £8.70)
​

In the bios it says that XMP profile is enabled but memory is showing 2133mhz on both ram. In windows Task manager it displays ram as 16GB but does not show what speed, slot used, Form Factor.

This is on a aorus x570 pro mother board. All drivers and windows updated. Thanks for any help.
 
skipper847 said:
Hi I have not messed about with this PC in terms of bios update or messed around with bios settings.

My Ram

My basket at Overclockers UK:
Total: £148.69 (includes shipping: £8.70)
​

In the bios it says that XMP profile is enabled but memory is showing 2133mhz on both ram. In windows Task manager it displays ram as 16GB but does not show what speed, slot used, Form Factor.

This is on a aorus x570 pro mother board. All drivers and windows updated. Thanks for any help.
Click to expand...

Try CPU-z see what that says its running at, it will also tell you which slots are occupied etc.

Also in the bios, disable XMP, save and exit, reboot back to the bios, enable XMP, and see if it works, any failure to post, or boot, will resort it back to defaults, regardless of it saying XMP is enabled.
 
Hi in CPU Z in the memory tab it says.

Type DDR4, Channel # Dual, Size 16 Gbytes, DC Mode greyed out, NB Frequency 1796.4 MHZ

Timings

DRAM Frequency 1796.4MHz
FSB:DRAM 3.54
CAS#LATENCY (CL) 10.0 clocks
RAS# to CAS# Delay (tRCD) 22clocks
RAS#Percharge (tRP) 22 clocks
Cyde Time (tRAS)42 clocks
Bank Cycle Time (tRC) 64 clocks
Command Rate (CR) 1T

DRAM idle Timer greyed out
Total CAS# (tRDRAM) Greyed out
Row to Column (tRCD) Greyed out.

Hope that helps.
 
skipper847 said:
In SPD tab with XMP enabled it says

Slot 2 and slot 4. DDR4-2132 (1066MHz)
Click to expand...

SPD tab is just information, the memory tab is what your ram is running at, speed and timings, so you are running 1 to 1 with NB and ram at the same speed and your ram is running at 3600mhz, apparently 10-22-22-42-64, are you sure its CAS 10 ? thats very tight for that speed, and if it really is, you may want to memtest it to make sure its stable.

All DDR4 chips are 2133mhz overclocked, this is mine:

tdGdmAx.jpg
 
Jamin280672 said:
SPD tab is just information, the memory tab is what your ram is running at, speed and timings, so you are running 1 to 1 with NB and ram at the same speed and your ram is running at 3600mhz, apparently 10-22-22-42-64, are you sure its CAS 10 ? thats very tight for that speed, and if it really is, you may want to memtest it to make sure its stable.

All DDR4 chips are 2133mhz overclocked, this is mine:

tdGdmAx.jpg
Click to expand...

Yes but I updated bios to latest and now its gone up to 18.0 clocks but everything is the same.
 
You must log in or register to reply here.
Back
Top Bottom