bios voltages?

[beachBOYken]

hi

im overclocking my e6300 , i want to get it up to about 2.8ghz which have with an fsb of about 400

i just wanted to know do i have to make the voltages higher in the bios, as ive done the following:

7. Set the MCH Voltage to +0.1v
8. Set the FSB Voltage to +0.1v
9. Set the VCORE to 1.45v - Please be aware that this will increase temps!

are these all neccasary in order to overclock?

cheers

 

[WJA96]

hi

im overclocking my e6300 , i want to get it up to about 2.8ghz which have with an fsb of about 400

i just wanted to know do i have to make the voltages higher in the bios, as ive done the following:

7. Set the MCH Voltage to +0.1v
8. Set the FSB Voltage to +0.1v
9. Set the VCORE to 1.45v - Please be aware that this will increase temps!

are these all neccasary in order to overclock?

cheers

No - for 2.8GHz, just leave the VCore on AUTO.

 

[beachBOYken]

thanks i will leave them all on stock voltages, one more thing my fsb starts at 100 is that correct on the ds4/e6300

if i put it at 400 i get about 2.8ghz and my ocz 6400 2gig ram go's too 800mhz ,is that about right?

thanks