Black screen

Samuel Butler · 5 Jun 2020 at 09:54

Hi all. So I’m not the best with PC’s but I know how to do the odd thing here and there. So I have an i7 6700k a gtx 1660ti oc and 8gb of ddr4 ram at 2300mhz. I wanted to ugrade my ram to 16gb so I purchased Hyper X’s 16gb kit at 3200mhz. I have an ASUS h110m - R motherboard and I Have a coller master cpu cooler and the black fan blocks the ram slots so I removed the black fan took it off and installed the new RAM. I turned on my ram and went to my BIOS and bang it was there 16gb of ram but it was running at 2300mhz so I thought this was strange but I went to YouTube and saw that this was normal and the frequency could be turned up. So I went to my bios and i changed the frequency to 3200 and once I did this I saved it and went to my task manager and it said I was still at 2300mhz so I went back to my bios and there was another box to with the frequency so I changed that to 3200 MHz and saved it then my screen was black and it kept saying ‘no signal found’. I started to panic and saw that you could reset the bios by using a jumper switch or something but I saw you could use paper clips and it didn’t work so it hen removed the battery on the motherboard and that didn’t work. My jumperswitch header is behind my gpu so I did have to remove it each time to attempt it and I left my pc off whilst I did it but still no result. I really need help and it would be much appreciated if anyone takes the time to read this.

Samuel Butler · 5 Jun 2020 at 19:22

Hi there, thank you for the reply, I have now re installed the old ram and wiggled some wires around, When i put the 16gb kit back in how do I safely set it to 3200 mhz

Samuel Butler · 7 Jun 2020 at 13:18

So whats the maximum speed I can run at. Ive Looked at tutorials online and they say in the asus bios you have to select AI tweaking and then select DOCP but i dont have docp?

Samuel Butler · 7 Jun 2020 at 13:51

Tetras said:
The manual for the Asus H110M-R says the maximum memory speed is 2133 Mhz (possibly 2400 if it supports Kaby Lake). I don't know what you're seeing 2300 from, because this is not usually an option. The standard memory speeds are: 2133, 2400, 2666, 2933, 3000, 3200. If you ARE able to set 3200 for some reason, then I'd make sure that the DRAM voltage is 1.35v because I doubt it will even boot at 1.2v. Don't run your original memory at 1.35v though!

And i meant 2133 sorry

Samuel Butler · 7 Jun 2020 at 14:37

bagel said:
could be under xmp instead

I go to xmp and then I select 3200mhz and save it and then it doesn't change, then I go back to my bios and there is another drop down box called 'Dram frequency' and i change that and then that's when I don.t get past the boot.