• Notice regarding image hosts and attachments. See here.

board or cpu

Associate
Joined
28 Dec 2010
Posts
1,543
came to check up a dual core socket 939 pc, the day after ive sold it it wont post beep or display
truobleshooted as usual and still nothing, took of the heat sink and touched the cpu while power was on, and there is no heat on the cpu atal, like its ice cold

so now im confused as to weather the cpu has burnt out or the motherboards dead.
what more likely as i need to get this fixed asap, as i sold it for £180
happy new year
 
Shame you're nowhere near me as I've got a few 939 boards I could have let you use to test, as I've had a few duff CPUs and machine replaces in the last 6 months.

If there's no heat on the CPU at all that's not a good sign, might be worth testing with another PSU if you've got one, if you're getting no signs of life its possible the PSU has keeled over, especially if it's an older one. Also worth checking the cables for the power button.
 
Last edited:
nope unfornutaly not, and am2 am3 doesnt support 939 cpu's
so im going with the motherboard, but just confusing, why does the cpu not heat up?
but its very unlikely a cpu would go anyway!
 
Shame you're nowhere near me as I've got a few 939 boards I could have let you use to test!

If there's no heat on the CPU at all that's not a good sign, might be worth testing with another PSU if you've got one, if you're getting no signs of life its possible the PSU has keeled over, especially if it's an older one.

tested with both a ezcool 700wat and a cm 650watt
nothing changes
 
I'd say the motherboard is more likely to fail than the CPU since CPUs tend to last a pretty long time unless they are overvolted heavily. However, I'd definitely want to test by using another board or another processor before spending money on anything.
 
I'd say the motherboard is more likely to fail than the CPU since CPUs tend to last a pretty long time unless they are overvolted heavily. However, I'd definitely want to test by using another board or another processor before spending money on anything.

i have no chance of that, and it was under water when i got the build so it may have been overclocked allot!
a new board is going to be £40 and a new cpuu is going to be £20, is it worth going for both as i really need this done asap!
 
With the age of the system, it could really be either, and as you've got little way of testing either component individually there's not much we can do to remotely diagnose. Probably worth picking up both and selling the unneccessary part again afterwards. There is still demand for the 939 kit because of how popular it was 5 years or so ago.

I would think the board is more likely too, but if you need to get up and running ASAP, well you don't need any more delays. The CPU should be relatively easy to MM or ebay again afterwards because of the demand.
 
just thought it would eem easier to go for the board and if it turns out the cpu is the culperate ill get 2 cpu's aswell (and then sell another dualcore build), as there's no burns or anything from the cpu ... hmm but then again, there is no beeps on the board, and its meant to beep when there's a cpu fail so its most likely the board :)
 
Last edited:
ordered a board, and if isnt the board ill spend another £40 on 2 cpus and a lil on some ddr1 and sell 2 builds, but the customer is willing to wait till i get the replacement board so i haven't lost the sale

and the thing is there was rust on parts of the board.ect and i had generally been mistreated, when i got the job lot i found mud on the 7800gtx sli pair
and it seems i revived both asus boards i got for them to only work for about a day or so, and fial on me, but to be expected when you pay £60 for a joblot and then sell a single one of the pc's for £180 :D

i think im onto something with this, i can get a dualcore 2gb ram and a 4650 (low power requirement gpu) for abour £100 and then sell it as a gaming pc for £220 housed in a cheep case
 
Back
Top Bottom