• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Bodging a power supply

Associate
Joined
31 Jul 2005
Posts
894
Location
Edinburgh
I have gotten a loan of my brothers 600w OCZ power supply as mine died recently. I am trying to power a GTX 580 from it but have a shortage of connectors.
The card needs two 8 pin pci e connectors but the power supply has only one 6 pin. I do have one 6 to 8 pin adaptor.
Will I get away with using a 2x molex to 6pin pci e adaptor and then using another 6 to 8 pin adaptor to plug into the card? The supply has two lines of molex connectors, I assume I would connect one plug to each to use both power rails?
Will this setup work ok? At least til I get a replacement supply back with all the plugs?
 
I would have a look and see if you have multiple rails. What JAKUS said would maybe be OK if it's a single rail but you hook a 8 pin bodge onto the wrong rail (IE the one with the CPU on it) and you could land up in heaps of trouble.

Personally I wouldn't risk it. If the PSU was capable of running dual 8 pin power connectors it would, you know? have 8 pin power connectors.
 
An 8 pin PCIE has no more current capacity than a 6 pin, they just added 2 returns (earths) to stop the children plugging in unsuitable power supplies.

The Guy , sensible enough to ask first shows enough common sense that he realises that this temporary bodge to get him up and running, so I'm sure he is not going to be hammering the pc until his proper PSU returns.

There is no more risk than using any other reasonable PSU, they all have overload/short protection.
If the psu can give about 25A at 12v he should be fine, it really does not matter what connectors it takes to get it to where it's needed ;)
 
Well I got a couple of adapters after looking at the PSU again and noticing there were two completely separate leads with a molex labelled (VGA/hdd, a bit vague but never mind) and it works a treat. Seems the dead psu didn't take anything else with it. Phew! Tho I'm a bit wary of my multi card reader/USB front panel as it appeared to be back feeding into the USB 3.0 port on the mobo (why does it need a 12v feed anyway?)
 
Back
Top Bottom