• Notice regarding image hosts and attachments. See here.

Boot Issue

Associate
Joined
1 Jan 2012
Posts
3
Hi all,

I recently completed my first custom build with the help of a friend and am encountering one issue with the finished product.

The BIOS is all setup correctly in terms of boot order however whenever I turn the PC on I am given the following screen:

wp000059j.jpg

(apologies for picture not working, but can open in new tab to view)

Forcing me to F1 into the BIOS and then exit it again to allow windows to boot.

I am using an Asus P8z68-V PRO/GEN3 MB with my HDD plugged into the intel 6gb/s port and the Marvell controller is disabled as not using

Anyone have any ideas as to why it will not auto detect and boot windows without the BIOS being opened and shut?
 
Welcome to the forum :)

Daft question, is there a fan plugged into the fan header and is there a option to ignore! :D

Another forum member posted a thread the other day with a similar issue, can't remember what the out come was.
 
No there isnt as have two fans on the cooler so its got a splitter off another header :) Not looked to see if there is an ignore for it, i'll go have a look.

thank you for the fast reply also :)
 
On asus boards of recent years, if you use a 3 pin fan youll get this F1 to continue issue. The fan will run at full speed, and you wont be able to speed control it. Theyre boards only allow control of 4 pin pwm fans connected to the cpu header.
 
On asus boards of recent years, if you use a 3 pin fan youll get this F1 to continue issue. The fan will run at full speed, and you wont be able to speed control it. Theyre boards only allow control of 4 pin pwm fans connected to the cpu header.

I get this occasionally on my Asus M4A89GTD using a Arctic Freezer 7 which is 4-pin, I assume it is because the fan is too slow to start.
 
Back
Top Bottom