• Notice regarding image hosts and attachments. See here.

Build Check

Associate
Joined
29 Mar 2004
Posts
456
So its that time to upgrade again I always like to build a decent price/performance rig, few questions:

Is it worth waiting for Haswell for potential price drop of the i5-3570K?
So many boards to choose from, a Z77 MSI/Gigabyte board is what I have "narrowed" it down to, just looking for a decent overclocker. looking at:

http://www.overclockers.co.uk/showproduct.php?prodid=mb-229-ms&groupid=701&catid=5&subcat=2261

http://www.overclockers.co.uk/showproduct.php?prodid=mb-390-gi&groupid=701&catid=5&subcat=2261

ram, out of the loop a little here, i gather timings aren't as important as they used to be and its all fairly cheap these days, probably looking normal/low profile as i have corsair dominator ram in my current rig and it was a pain to fit :p any suggestions?

current psu is:http://www.extremeoverclocking.com/reviews/cases/cooler_master_igreen_600w_3.html

Would this be good enough for a modern z77 board and say a 7850/7950, im guessing not even though it has the needed connectors afaik.
 
What is your budget for all of this?

The 3570k won't drop in price when Haswell comes along, CPU prices keep to their price range, so if anything it will be more of a inclination to grab a 1150 motherboard and a Haswell chip (4670k).

If you want low profile RAM, the samsung green stuff is very impressive and very low profile, so definitely grab some of that.

PSU wise, not sure, it's not the worst brand, but then not the best. It should handle a single card perfectly fine. I'd still be inclined to grab a Corsair, XFX, Seasonic however.
 
The only reason to wait for Haswell is to buy a haswell chip/motherboard. Prices of previous gen's won't fall.. Sandybridge chips are now more expensive than they were when they were first released, though Haswell being a new Socket Sandy/Ivy will be phased out slowly.

The Z77X D3H would be my choice, though the Z77 D3H is cheaper. The only major advantage of the Z77x D3H is the SLI/Xfire at x8/x8. But if your not Dual GPUing the Z77 D3H will be perfect.
 
Thinking I may as well hold of for haswell then more future proofing i suppose as well with the new socket, still not sure about the PSU though :p
 
The PSU should be fine.. It's a good make and won't take any of your components with it if it does give up the ghost, though as Reaper said getting a new £50-£60 PSU would be well worth it. :) (in the longer run).
 
Back
Top Bottom