[Build Log] -------- "MONOCHROME" --------

[C4MPB377]

Oh lord, those sauced Titans. This is going to be a beast.

 

[Jameswalt1]

Here are the Rocket Science fittings I'll be using for the build. They are, in my opinion, the best looking fittings for 1/2 inch tube. Here in the USA and also Australia (where the fittings are made) Imperial sizing is common for available copper tube, so these fittings hit the spot.

They are near identical to Bitspower C47's in terms of overall size. So, similar to that product these fittings leave a small footprint and fit flush with any other fitting adapter they might be connected to, unlike all other brands on the market whose 1/2 inch fittings are gigantic to the point of being just plain ugly.

I can't recommend enough. Keep in mind that the prices on the Rocket Science website are AUS dollars, not US dollars, so with the conversion they actually end up being only 6.50 a piece (I don't know the conversions off hand for the other countries this build log is posted). You can also use the code FASTFATE0105 for free shipping on orders over $50!

 

[russell664]

So shiny. I love shiny things.

Great work man!!!!

 

[WuMyster]

Just a question about the photography, what are you using for your backgrounds? Mind taking a pic of your photo rigs?

Look forward to the build none the less.

 

[HackJoe]

Just a question about the photography, what are you using for your backgrounds? Mind taking a pic of your photo rigs?

Look forward to the build none the less.

I'd like to know this too, your photography is great! I've been looking at a couple 400w studio lights with soft boxes and a 3x3m white/black backdrop. but if such results can be achieved with less I'd love to know how.

Looking forward to the case reveal. Can't be long now??

J.

 

[Jameswalt1]

I'd like to know this too, your photography is great! I've been looking at a couple 400w studio lights with soft boxes and a 3x3m white/black backdrop. but if such results can be achieved with less I'd love to know how.

Looking forward to the case reveal. Can't be long now??

J.

Yeah I'll get a pic of my set up for photo's. the set up probably only costs like $300. Not including camera obviously.

I'm allowed to reveal the case on Friday at 6pm (your time) when the NDA lifts

 

[HackJoe]

Epic, looking forward to it.

J.

 

[Jameswalt1]

Here's the awesome looking EVGA X99 Micro as well as my 5960x!

I've mentioned before that I'm a big fan of EVGA's new boards, as well as their bios' - and this board is no different. Rock solid piece. I've played with it to check the processor and was able to effortlessly overclock it to 4.6 on air using a pretty cheap cooler. Once on water I think this think will have even more legs

 

[coolamasta]

What did you do to that Titan lol impressive pics and nice build coming together

 

[Spacedeck]

Just... that looks beast. Is this your own personnel build? This must have cost an arm and a leg!

 

[Dirk Diggler]

Just... that looks beast. Is this your own personnel build? This must have cost an arm and a leg!

If he's subject to a NDA I would hope he's had a donation or two.

 

[WuMyster]

Just... that looks beast. Is this your own personnel build? This must have cost an arm and a leg!

Sponsored here and there I believe.

 

[Jameswalt1]

Here's the case!

From new manufacturer HEX GEAR (www.HEX-GEAR.COM) this is the R40, a premium mATX case. I made a lot of effort to do the case justice with my photos, and show that it truly is a high end piece of gear.

No matter what angle you look at it from the case is flawlessly sculpted, to the point of looking almost like a render. It's the kind of tasfeful, well made piece that wouldn't look out of place in a high end Swedish furniture catalog, it just oozes class.

The case is made from steel and aluminum - and comes in black and white (mine being black here). The front and rear acrylic inserts come standard in black on the white case and white on the black case, but color accent packs will be available to order so you can customize the color combination of your case. In my pictures you can see the white acrylic inserts but my final build will actually use silver inserts.

There will also be other modular items available for order, for example in my pictures you can see a shot of 4 smaller rectangular metal pieces with different shaped cutouts in each one - these are modular reservoir/pump mounts that are interchangable on the interior wall of the case. There are a ton of possibilities in this regard, another one being an add-on piece that allows the case to be constructed in a reverse mATX form!

Case specs:
- Materials: Aluminium | Steel | Acrylic
– Colours Available: Black | White
– Dimensions(WxDxH): 241.5 x 483 x 415
– Motherboard form factor: mATX
– 3.5" Drives: 2
– 2.5" Drives: 3
– Cooling: 6 x 120mm (3 x top 1 x rear 2 x bottom)
– PCI Slots: 5
– Suitable for air or watercooling

CONTENTS
– Screws and fixings
– 1 x white / black or white / steel vandal switch
– Motherboard standoffs
– Instruction manual
– Hex keys
– 90deg IEC adapter
　

 

[Pelinox]

Looks like an interesting case, although it reminds me of the EVGA Hadron. Just bigger.

 

[Jameswalt1]

Here are the awesome EK Coolstream PE rads for the build!

 

[MrAnthony]

Very nice looking case! Waiting on this being finished.

 

[HackJoe]

Freaking sweet! Think I may have to have one of them.. Q1 2015 is a little open for interpretation but I guess that gives us time to drools over the builds. Cant wait to see what you do with it.

J.

 

[John.M]

Awesome! This is art in engineering!

 

[Jameswalt1]

The SSD's arrived! Looks like I accidently ordered 240Gb's, but oh well they're plenty

You can also see in the pics that I very easily converted the case to reverse mATX. Due to the modular nature of the Hex Gear case it's extremely easy to do.

 

[rare]

My god