• Notice regarding image hosts and attachments. See here.

Can I improve this build?

Soldato
Joined
1 Nov 2007
Posts
8,161
Location
England
Can anyone suggest any improvements for the following build at all?

I3DFh.webp
 
Whats this PC used for?


I have two suggestions,

This XFX 850watt PSU is more than enough for that spec and even a second 7950 - http://www.overclockers.co.uk/showproduct.php?prodid=CA-000-XF&groupid=701&catid=123&subcat=1497


16GB of RAM seems a lot, if you want 16GB of RAM,
http://www.overclockers.co.uk/showproduct.php?prodid=MY-112-KS&groupid=701&catid=8&subcat=1517

But you will probably find that 8GB is plenty,
http://www.overclockers.co.uk/showproduct.php?prodid=MY-114-KS&groupid=701&catid=8&subcat=1517

1600MHz is the price/performance sweet spot.
 
As above.

Although, I'd go for a different case. The 300 has virtually no cable management and has pretty boring looks (my opinion anyway). For a build like that I'd go for something more stylish like a Shinobi or CM-690.
 
Whats this PC used for?

Gaming and programming primarily. One of the SSD drives will be a Linux boot drive and the other SSD drive will be a Windows 7 boot drive.

I have two suggestions,

This XFX 850watt PSU is more than enough for that spec and even a second 7950 - http://www.overclockers.co.uk/showproduct.php?prodid=CA-000-XF&groupid=701&catid=123&subcat=1497

I just wanted to make sure that the power supply would last as long as possible although if you say an 850W power supply would be sufficient even with Crossfire then perhaps I'll move down to a lower rated power supply.

16GB of RAM seems a lot, if you want 16GB of RAM,
http://www.overclockers.co.uk/showproduct.php?prodid=MY-112-KS&groupid=701&catid=8&subcat=1517

But you will probably find that 8GB is plenty,
http://www.overclockers.co.uk/showproduct.php?prodid=MY-114-KS&groupid=701&catid=8&subcat=1517

1600MHz is the price/performance sweet spot.

Ah, thanks for the tip.

1250W PSU is overkill even if youre going to CrossFire in the future.

Do you have a suitable CPU cooler so you can get the best overclock out of the processor?

Swap the RAM to this:

Crucial Ballistix Sport 8GB (2x4GB) DDR3 PC3-12800C10 1600MHz Dual Channel Kit

or this:

Kingston HyperX Genesis 16GB (4x4GB) DDR3 PC3-12800C9 1600MHz Dual/Quad Channel Kit

There must be better cases available.

Thanks for the tip. I'll have a look at the available cases. I might even go for a full tower case. I'm basically looking to make sure that the case and power supply last for at least 5 years without having to upgrade them so that I can just keep the system as up to date as possible without having to change them every time I upgrade the system.
 
As above.

Although, I'd go for a different case. The 300 has virtually no cable management and has pretty boring looks (my opinion anyway). For a build like that I'd go for something more stylish like a Shinobi or CM-690.

Ah thanks. I'll have a look at those cases.
 
OK. Updated the specs based on advice. I've kept the power supply at 1250W so that it will last for a long time and have upgraded the case to something that looks cool and has plenty of space and should also last for 5 years or more.

4H6A8.webp
 
OK, the only other thing I can see questionable is the two HDD's, you can get a single 2TB for much less,
http://www.overclockers.co.uk/showproduct.php?prodid=HD-244-SE&groupid=701&catid=14&subcat=1955

Or a 3TB drive for the similar outlay,
http://www.overclockers.co.uk/showproduct.php?prodid=HD-376-WD&groupid=701&catid=14&subcat=1955

Unless you really are wanting a RAID setup?

1 SSD and 1 hard drive is for Linux. The other SSD and hard drive is for Windows.


1250w is massive overkill. a 850w psu would run that and allow for furture upgrades

OK. Which brand is the best for an 850W PSU?
 
a stulid said on post #2 http://www.overclockers.co.uk/showproduct.php?prodid=CA-000-XF&groupid=701&catid=123&subcat=1497 you would see a difference in ur electric bills to

assuming you mean going from 1250w to a 850w PSU - it doesn't work like that. Your system uses what it uses.

If anything, it might cost him more as it would be going from Gold to Silver. We're still talking about a marginal amount of money not worth thinking about.

Brands for 850w the XFX is best value: corsair, antec, ocz, cooler master all reliable brands.

Get the XFX 850w Silver as linked earlier.
 
Thank you all for the help :).

A handy little tip is to make sure the SATA controller are set to AHCI.

Also try not to use the Marvel SATA6Gb/s ports as they offer worse performance than the native Intel ones for the SSD's,

http://www.gigabyte.com/products/product-page.aspx?pid=3973#sp
Chipset:

2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA 3Gb/s devices
1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s device
Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

Marvell 88SE9172 chip:

2 x SATA 6Gb/s connectors (GSATA3_5, GSATA3_6) supporting up to 2 SATA 6Gb/s devices
Support for SATA RAID 0 and RAID 1


So I personally would connect the SSD's to the two White ports (Intel) and the HDD's to the two Black ports (Intel 3Gb/s)

Then with the optical drive you can plug it into the other Black SATA port that isnt angled like the others.

Untitled-15.png
 
I have crossfire 6950, a 850W PSU, and load is around 50% at peak (unigine / BF3, 95-100% load both GPU). 850W is more than enough. Saves you £70, that you can spend on other things. Better SSD, a CPU cooler...
 
Last edited:
Back
Top Bottom