Hi, i am using 9-9-9-28 at 1.8volts as reccomended on my ram which is supposed to go to 2000mhz. I have the cpu fsb at 425mhz and multiplier at x9 and fsb volts at 1.5 and cpu core at 1.368. This runs solid for 2 12 hr prime tests ive done, however soon as i increase the ram any more it is ok for a few hours sometimes minutes then just shuts down. What would you suggest i change? ps i am running unlinked at the minute aswell till i solve it at 16:30 my spec is below. The mcp is 1.1.650 and spp at 1.47. Cheers guys
EVGA 790I SLI F T W DIGITAL M/B / Q6850 EXTREME CPU / X3 BFG 260GTX MAXCORE H2O/OC / 4GB OCZ DDR3 PC3-16000 2000MHz Platinum (9-9-9-28) Dual Channel kit / X2 SAMSUNG 1TB SPINPOINTS / x2 OCZ ssd vertex 60gb in raid0 / Bitspower Mosfet -N/B and
S/B Blocks on EHEIM PUMP WITH 5/8" HOSE AND AQUACOMPUTER 360 RAD / D-TEK FUSION 2 WITH QUAD CORE INSERT ON CPU WITH THERMOCHILL 360 RAD/ LAING DDC 1T (18W) XSPC TOP / TFC 360 RAD AND LAING DDC 1T (18W) XSPC TOP 3/4" TYGON HOSE ON GPUS / ALL CONTROLLED VIA AQUAERO+AQUASTREAM/ TH2GO ON X3 SAMSUNG
EVGA 790I SLI F T W DIGITAL M/B / Q6850 EXTREME CPU / X3 BFG 260GTX MAXCORE H2O/OC / 4GB OCZ DDR3 PC3-16000 2000MHz Platinum (9-9-9-28) Dual Channel kit / X2 SAMSUNG 1TB SPINPOINTS / x2 OCZ ssd vertex 60gb in raid0 / Bitspower Mosfet -N/B and
S/B Blocks on EHEIM PUMP WITH 5/8" HOSE AND AQUACOMPUTER 360 RAD / D-TEK FUSION 2 WITH QUAD CORE INSERT ON CPU WITH THERMOCHILL 360 RAD/ LAING DDC 1T (18W) XSPC TOP / TFC 360 RAD AND LAING DDC 1T (18W) XSPC TOP 3/4" TYGON HOSE ON GPUS / ALL CONTROLLED VIA AQUAERO+AQUASTREAM/ TH2GO ON X3 SAMSUNG