Case for RX360 and EX240

[Michaeljcox24]

I have to do the 12 month maintenance on my loop this coming December and would very much like to have the RX360 that is outside of the case (Haf-X), inside.

Couples of questions:

- Which cases out there support would support an RX360 and an EX240 for the cpu ?
- I noticed there were no RX360's for sale on OcUK, but when I checked on XSPC's website, they are advertising a V2 of the radiator. What are the differences. Was there a design fault in the original?

Thanks.

 

[daveip]

Corsair Carbide 540 might fit the bill. Can fit a 360 in the front and 240 at the top.

No idea about the V2 radiator though

 

[Alz_D]

Switch 810 fits 360 in the roof and 240 in the bottom if you take out one of the hard drive cages.

 

[Michaeljcox24]

The 750D looks like it might do it, but the thickness of the 360 rad is the problem, I don't know how low down it will come close to the MB

 

[Avenged7Fold]

Corsair 540 can.

 

[Michaeljcox24]

I was looking at that, but I have a dual bay res / pump combo, which has to be the other way up.

 

[Avenged7Fold]

I thought they would work exactly the same as long as any fill ports were closed. Or does the pump get in the way of the enclosure?

 

[Michaeljcox24]

It would work the same, but you wouldn't be able to fill it up

 

[Avenged7Fold]

If you didnt mind a bit of light modding, could just make sure the bay enclosure didnt block the fill port and then add a bit of hosing to the fillport with a stopper at the end. Then you can fill it up using the bit of hosing. You could add a tiny tube reservoir in the back compartment out of sight and use that to fill up your loop too.

 

[Glanza]

NZXT 820 can as I have it with those rads.

360 in the top and 240 in the bottom

 

[Michaeljcox24]

NZXT 820 can as I have it with those rads.

360 in the top and 240 in the bottom

Thanks, will look into that one.