Associate
does anyone know if these casters are available in the uk ,cheers.
CASELABS casters
- Thread starter lordfletch
- Start date
Just standard plate castors....
Just find some you are happy with aesthetically
http://www.rosscastors.co.uk/tw-40m...d-brake.html?gclid=CNyLr9_tstMCFcgy0woddQIMFg
thanks mate,so the screw hole spacings are standard ?
Associate
i would not think the spacing is standard because it depends on the size of the casters.
the bigger the caster then it would have a thinker bigger stronger plate and if the plate was bigger the holes would be further apart
Casters are available in various sizes but there do seem to be some standard sizes and I very much doubt Caselabs have theirs made especially so they must be one of them.
I got some for a Thremaltake case easily. All I did was measure the gap between the holes and where they mounted to the case, it was then a simple matter of some googling to end up with some decent strong casters for about £4 for 4.
I got some for a Thremaltake case easily. All I did was measure the gap between the holes and where they mounted to the case, it was then a simple matter of some googling to end up with some decent strong casters for about £4 for 4.
Soldato
plus if you look on the link posted to rosscastors they have a schematic image with each one giving you the exact dims