Change to AHCI problem?

Essexraptor · 20 Mar 2010 at 19:32

Ok here's the problem

Originally installed Win7 ultimate to my nice new shiny SSD in IDE mode.

When I do the registry tweak to change to AHCI I then reboot to BIOS and change to ACHI under the setting "SATA RAID/AHCI Mode" on my GA-EX58-UD5.

So far so good...... but when I then save the change and boot it fails with a No BOOTMGR error !!!

Anyone tell me what I'm doing wrong please?

Essexraptor · 21 Mar 2010 at 14:09

MMMMMMMmmmmmmm Yep double checked...I'll have to get you to come down to Basildon and have a look for me!!?

Essexraptor · 21 Mar 2010 at 14:24

BazBell said:
Did you install the SSD with another hard drive in the system? If you did you're having similar problems to me when I installed a new hard drive, see here http://forums.overclockers.co.uk/showthread.php?p=16106886#post16106886

Yep... I have another 2 x 750Gb Seagates in as well. Loaded Win7 to the SSD as the boot drive in IDE mode and I'm trying to changeover to AHCI.

Essexraptor · 21 Mar 2010 at 14:29

Just a thought.... could it be the AHCI driver?

Essexraptor · 21 Mar 2010 at 14:39

yes i'm on the puter now!

Essexraptor · 21 Mar 2010 at 15:09

Success!!!

I'll post the relevant link here in a mo just incase anyone else has the same problem

Essexraptor · 21 Mar 2010 at 15:13

Ok

I had to modify this key in regedit AS well

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV

the link to the microsoft knowledge base is shown below

http://support.microsoft.com/kb/922976

Hope this helps anyone who has the same problem
#
ATB

Essexraptor · 21 Mar 2010 at 18:06

BazBell said:
Essexraptor

I take it your problem was nothing to do with your SSD being active but just down to modifying the registry?

Nice to hear you sorted it though

Down to registery problem only

Essexraptor · 22 Mar 2010 at 15:46

you getting a error message

bootmgr missing
press alt-ctrl- del to continue?

use this link to repair your bcd. I used method 2 to get back into my Win7 Ultimate 64 bit

http://social.technet.microsoft.com...p/thread/e6e2399c-746a-4d45-8b77-dc6e89fd9409

then note the advise above about the other registry entry that you may well have to change as well ie the IastorV key

ATB

PS. I note that you have a OCZ 30Gb SSD? I have a OCZ 100Gb LE perhaps it's a OCZ thing?